EmbeddedRelated.com
    Parts   Analog ICs  Comparators    TLV1702AIDGKR
TLV1702AIDGKR

TITLV1702AIDGKR

Texas Instruments
Comparator Standard (General Purpose) Open-Collector 8-VSSOP
NRND2,771 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TLV1702AIDGKR is a dual-channel, general-purpose comparator designed for wide supply range operation from 2.2V to 36V. It features an open-collector output and rail-to-rail inputs, making it highly versatile for interfacing with different logic levels. With a low quiescent current of 55uA per comparator, it is optimized for power-sensitive monitoring applications.

Why Choose This Part

The device offers a high maximum supply voltage of 36V while maintaining a low current consumption of 75uA maximum. Its open-collector output simplifies level shifting, allowing the output to be pulled up to a different voltage rail than the comparator supply. Additionally, the 560ns propagation delay ensures rapid response times for fault detection circuits.

Applications

Overvoltage and Undervoltage Detection
Used in power supply monitoring to trigger system alerts or shutdowns when rail voltages exceed or fall below set thresholds.
Window Comparators
The dual-channel configuration allows for easy implementation of window detectors to ensure signals stay within a specific voltage range.
Zero-Crossing Detectors
Utilizes the high-voltage capability and rail-to-rail input to detect when an AC signal crosses the ground or a reference point.
Industrial Sensor Interfacing
Converts analog sensor outputs into digital signals for microcontrollers in 12V or 24V industrial systems.

Key Specifications

Type Standard (General Purpose)
Output Type Open-Collector
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Number of Elements 2
Operating Temperature -40degC ~ 125degC
Current - Output (Typ) 20mA
Propagation Delay (Max) 560ns
Supplier Device Package 8-VSSOP
Current - Quiescent (Max) 75uA
Current - Input Bias (Max) 0.015uA
Voltage - Input Offset (Max) 3.5mV
Voltage - Supply, Single/Dual (+/-) 2.2V ~ 36V, +/-1.1V ~ 18V

Getting Started

To evaluate this part, use a standard 8-pin VSSOP to DIP adapter for breadboarding or prototype on a universal PCB. Ensure a pull-up resistor is placed on the output pins, as the open-collector architecture cannot drive high without one. Decouple the V+ pin with a 0.1uF ceramic capacitor placed close to the device to minimize switching noise.

TLV1702A Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Voltage - Input Offset (Max) Stock
TLV1702AIDGKR (this part) TSSOP-8 3.5mV 2,771
TLV1702AIRUGR XFQFN-8 2.5mV —

Also Consider

LM393ADGKR TITexas Instruments - An industry-standard dual comparator that is cost-effective for applications where higher quiescent current and slightly slower speeds are acceptable.

Categories

Analog ICs > Comparators Microcontrollers > Texas Instruments