EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    TI TLV Op-Amps Family    TLV2372IP    TLV2372IP
TLV2372IP

TITLV2372IP

Texas Instruments
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-PDIP
Active1,144 in stock
Datasheet Digi-Key Compare Prices

Overview

The TLV2372IP is a dual-channel, rail-to-rail input and output (RRIO) operational amplifier designed for low-power applications. It operates over a wide supply range of 2.7V to 16V, featuring a 3 MHz gain bandwidth product and a low supply current of 550uA per channel. Its high input impedance and CMOS architecture make it suitable for interfacing with high-impedance sensors in battery-powered environments.

Why Choose This Part

The RRIO capability allows for maximum dynamic range on low-voltage rails, while the 16V maximum supply voltage provides more headroom than standard 5V CMOS op-amps. It combines a low 1 pA input bias current with a shutdown mode that reduces current to 25uA, extending battery life in idle states.

Applications

Battery-Powered Instrumentation
Ideal for handheld test equipment and portable medical devices due to low power consumption and rail-to-rail performance.
Active Filters
The 3 MHz bandwidth and high slew rate allow for effective filtering in signal conditioning circuits up to the low megahertz range.
Remote Sensing
High input impedance with 1 pA input bias current minimizes error when reading from high-impedance transducers in remote locations.
Industrial Automation
Reliable performance across a wide -40C to 125C temperature range for process control and sensor amplification.

Key Specifications

Slew Rate 2.1V/us
Output Type Rail-to-Rail
Mounting Type Through Hole
Amplifier Type Standard (General Purpose)
Package / Case 8-DIP (0.300", 7.62mm)
Current - Supply 750uA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC (TA)
Gain Bandwidth Product 3 MHz
Voltage - Input Offset 2 mV
Supplier Device Package 8-PDIP
Current - Output / Channel 16 mA
Voltage - Supply Span (Max) 16 V
Voltage - Supply Span (Min) 2.7 V

Getting Started

Since this is a through-hole PDIP-8 component, it can be directly prototyped on standard breadboards or perfboards. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin for stability. For evaluation of the TLV2372 family performance, generic dual op-amp evaluation modules (EVMs) from Texas Instruments are available.

Also Consider

TLV2372IDR TITexas Instruments - The same dual op-amp circuit in an SOIC-8 surface mount package for production PCB designs.

Categories

Analog ICs > Op-Amps