EmbeddedRelated.com
    Parts    TLV2374IN
TLV2374IN

TITLV2374IN

Texas Instruments
Standard (General Purpose) Amplifier 4 Circuit Rail-to-Rail 14-PDIP
Active7,335 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TLV2374IN is a quad-channel, rail-to-rail input and output (RRIO) operational amplifier designed for low-voltage operation with a wide supply range of 2.7 V to 16 V. It combines a 3 MHz gain bandwidth product with a very low input bias current of 1 pA, making it suitable for high-impedance sensor interfacing in both battery-powered and industrial systems.

Why Choose This Part

The rail-to-rail input and output capability maximizes dynamic range on low voltage rails, while the 16 V maximum supply voltage provides significant headroom compared to standard 5 V op-amps. Its 14-DIP package is particularly useful for rapid prototyping on breadboards and through-hole PCB designs.

Applications

Battery-Powered Instrumentation
Ideal for handheld test equipment and portable medical devices like blood glucose monitors due to its low 550 uA per channel supply current.
Active Filter Design
The 3 MHz bandwidth and four independent circuits allow for the implementation of complex multi-stage active filters in a single 14-pin package.
Remote Sensing
Low input bias current (1 pA) enables precise signal conditioning from high-impedance sensors in remote industrial automation environments.
White Goods
Used in appliance control systems for motor current sensing and user interface signal processing where rail-to-rail performance is required.

Key Specifications

Slew Rate 2.1V/us
Output Type Rail-to-Rail
Mounting Type Through Hole
Amplifier Type Standard (General Purpose)
Package / Case 14-DIP (0.300", 7.62mm)
Current - Supply 750uA (x4 Channels)
Number of Circuits 4
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC (TA)
Gain Bandwidth Product 3 MHz
Voltage - Input Offset 2 mV
Supplier Device Package 14-PDIP
Current - Output / Channel 16 mA
Voltage - Supply Span (Max) 16 V
Voltage - Supply Span (Min) 2.7 V

Getting Started

For rapid evaluation, plug the TLV2374IN into a standard breadboard and bypass the supply pins with 0.1 uF ceramic capacitors. Ensure the load current does not exceed 16 mA per channel to maintain rail-to-rail output performance.

TLV2374 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
TLV2374IN (this part) DIP-14 7,335
TLV2374IPW TSSOP-14 —

Also Consider

MCP6004-I/P MCHPMicrochip Technology - A more cost-effective quad RRIO op-amp for 5V-only systems, though it has a lower maximum supply voltage of 6V.