EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    TLV6001RIDBVR
TLV6001RIDBVR

TITLV6001RIDBVR

Texas Instruments
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SOT-23-5
NRND5,939 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TLV6001RIDBVR is a single-channel, general-purpose operational amplifier from Texas Instruments featuring rail-to-rail input and output capabilities. It is designed for low-power applications, operating with a supply current of just 75 uA and supporting a wide supply range from 1.8V to 5.5V. This amplifier is unity-gain stable and includes integrated RF and EMI filters to minimize interference in sensitive circuits.

Why Choose This Part

The device offers a balanced 1 MHz Gain Bandwidth Product with a 0.5V/us slew rate, making it versatile for low-frequency signal processing. Its integrated EMI/RFI filtering reduces the need for external decoupling components in noisy environments. The rail-to-rail I/O swing ensures maximum dynamic range when operating from low-voltage rails.

Applications

Portable Health Monitoring
Ideal for battery-powered blood glucose meters where low 75 uA current consumption and 1.8V operation extend battery life.
Environmental Sensing
Used in smoke detectors and gas sensors to buffer high-impedance sensor signals with its low 1 pA input bias current.
Consumer Power Management
Suitable for current sensing and voltage monitoring in power banks and mobile charging accessories.
White Goods
Provides cost-effective signal conditioning for control logic in large household appliances.

Key Specifications

Slew Rate 0.5V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case SC-74A, SOT-753
Current - Supply 75uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 750 uV
Supplier Device Package SOT-23-5
Current - Output / Channel 15 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

Prototyping can be done using SOT-23 to DIP adapter boards for breadboard compatibility. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin to maintain stability. The device is stable with capacitive loads and does not require complex compensation networks for most general-purpose unity-gain configurations.

Also Consider

TLV9001IDBVR TITexas Instruments - Offers a higher 1 MHz bandwidth with lower noise and improved DC precision for similar low-voltage applications.
MCP6001T-I/OT MCHPMicrochip Technology - A widely used alternative for general-purpose 1.8V to 6V applications with similar 1 MHz bandwidth.
OPA348AIDBVR TITexas Instruments - Features significantly lower supply current (45 uA) for extremely power-constrained designs.

Categories

Analog ICs > Op-Amps