EmbeddedRelated.com
    Parts   Power Management  LDO Voltage Regulators    TLV70033DDCR
TLV70033DDCR

TITLV70033DDCR

Texas Instruments
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA SOT-23-THIN
NRND4,142 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The TLV70033DDCR is a low-dropout (LDO) linear regulator from Texas Instruments designed for portable, battery-powered electronics. It provides a fixed 3.3V output at up to 200mA with a very low quiescent current of 31uA, making it ideal for maintaining efficiency in low-power standby modes. The device is housed in a compact SOT-23-5 Thin package and includes an active-high enable pin for power sequencing.

Why Choose This Part

This regulator features a high PSRR of 68dB at 1kHz, which effectively filters ripple from noisy switching power supplies. It includes integrated protection against overcurrent, overtemperature, and reverse polarity, ensuring robust operation in various environmental conditions. Its low noise floor of 48 nV/rtHz makes it suitable for sensitive analog and RF signal chains.

Applications

Battery-Powered Handhelds
Ideal for smartphones and PDAs where low quiescent current is critical for extending battery life.
Wireless Connectivity Modules
Provides clean, low-noise power for ZigBee and Bluetooth radios that require high PSRR.
WLAN PC Cards
Regulates power for PC add-on cards and peripheral modules with minimal board space requirements.
IoT Sensor Nodes
Supplies stable voltage to microcontrollers and sensors in distributed wireless networks.

Key Specifications

PSRR 68dB (1kHz)
Output Type Fixed
Mounting Type Surface Mount
Package / Case SOT-23-5 Thin, TSOT-23-5
Control Features Enable
Current - Output 200mA
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
Number of Regulators 1
Output Configuration Positive
Operating Temperature -40degC ~ 125degC (TJ)
Voltage - Input (Max) 5.5V
Voltage Dropout (Max) 0.25V @ 200mA
Current - Supply (Max) 270 uA
Supplier Device Package SOT-23-THIN
Current - Quiescent (Iq) 55 uA
Voltage - Output (Min/Fixed) 3.3V

Getting Started

To use this LDO, place a 1uF ceramic capacitor at both the input and output pins as close to the device as possible to ensure stability. The EN pin can be tied to the input voltage for always-on operation or driven by a GPIO for power management. Ensure the PCB thermal land is sufficient for the power dissipation expected from the voltage drop at 200mA.

TLV70033 Family

Part NumberDifferenceStock
TLV70033DBVR BVR —
TLV70033DBVT BVT —

Categories

Power Management > LDO Voltage Regulators