TMC2208 SilentStepStick
MPN: TMC2208SILENTSTEPSTICK
Analog Devices / Maxim Integrated
Power Management IC Development Tools Silent stepper motor driver 5 to 36V, up to 1.4A with S/D and UART Interface, 256 Steps, SpreadCycle and Stealthchop
164 in stock
Overview
The TMC2208 SilentStepStick is a compact plug-and-play stepper motor driver board based on the Trinamic TMC2208 IC. It operates from 5V to 36V and supports up to 1.4A RMS current, featuring proprietary technology to eliminate motor noise at low speeds.
Why Choose This Part
The module integrates StealthChop2 for silent movement and SpreadCycle for high-dynamic performance. It supports up to 256 microsteps via internal interpolation and allows for easy configuration of current and operation modes via a single-wire UART interface.
Applications
Desktop 3D Printers
Replaces noisy A4988 drivers to enable near-silent printing without hardware redesign.
Medical Laboratory Equipment
Ideal for precision liquid handling and sample positioning where acoustic noise must be minimized.
Office Automation
Provides smooth, quiet operation for scanners, photocopiers, and motorized window blinds.
Key Specifications
Type
Power Management
Contents
Board(s)
Function
Motor Controller/Driver, Stepper
Utilized IC / Part
TMC2208
Getting Started
Plug the module into a standard Pololu-compatible pin header on a controller board like a RAMPS or SKR. Ensure the logic voltage (VIO) is between 3.3V and 5V and adjust the motor current using the onboard potentiometer or UART commands.
Also Consider
A4988
Allegro MicroSystems
- A lower-cost, industry-standard alternative for applications where acoustic noise is not a primary concern.
