TMC6200 3-Phase Gate Driver
Overview
The TMC6200 is a gate driver IC for driving three half-bridges, which makes it suitable for 3-phase power stages. It is typically used as the interface between a microcontroller or motion-control controller and external MOSFETs in motor-drive systems. The part is aimed at compact, efficient power electronics where the control logic and switching stage are separated.
Why Choose This Part
This type of gate driver lets you pair the control logic with MOSFETs that match your voltage, current, and thermal needs instead of being locked into an integrated power stage. That can improve flexibility in board layout, thermal design, and BOM selection. It is a good choice when you want a dedicated driver for three half-bridges rather than a more integrated motor controller.
Applications
Getting Started
Start by reviewing the TMC6200 datasheet and the reference schematic for the recommended bootstrap, gate resistor, and decoupling network. Engineers typically pair it with a microcontroller or motion controller and validate the power stage on a PCB before moving to a full motor system. For bring-up, use a current-limited bench supply, verify gate timing and switching waveforms, and tune the external MOSFET and passive values for your bus voltage and load.
TMC6200 Family
| Part Number | Difference | Stock |
|---|---|---|
| TMC6200-BOB (Analog Devices Inc./Maxim Integrated) | BOB | 29 |
| TMC6200-EVAL (Analog Devices Inc./Maxim Integrated) | EVAL | 3 |
