EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
24days 15hrs 48min 59sec
Learn More →
TPA3118D2DAPR

TITPA3118D2DAPR

Texas Instruments
Amplifier IC 2-Channel (Stereo) Class D 32-HTSSOP
NRND26,596 in stock

Overview

The TPA3118D2DAPR is a high-efficiency, Class D stereo audio amplifier capable of driving up to 30W per channel into 8-ohm loads. It operates across a wide supply range of 4.5V to 26V, making it suitable for both battery-powered and mains-powered audio systems. The device features integrated protection circuitry to ensure reliable operation under demanding thermal and electrical conditions.

Why Choose This Part

This amplifier minimizes the need for bulky external heatsinks due to its high-efficiency Class D architecture and thermal pad package design. It includes advanced protection features such as short-circuit, thermal, and over-voltage shutdown to prevent failure during fault conditions. The differential input stage also provides excellent common-mode noise rejection in noisy electronic environments.

Applications

Bluetooth Speakers
Ideal for portable audio systems requiring high power efficiency to extend battery life while delivering high-quality stereo output.
TV and Soundbar Audio
Provides the necessary power for mid-range television speakers and compact soundbars with minimal heat dissipation.
Public Address Systems
Used in distributed audio systems where differential inputs help minimize noise over longer signal traces.
Home Theater Systems
Acts as the power stage for satellite speakers in multi-channel audio setups.

Key Specifications

Type Class D
Features Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown
Output Type 2-Channel (Stereo)
Mounting Type Surface Mount
Package / Case 32-PowerTSSOP (0.240", 6.10mm Width)
Voltage - Supply 4.5V ~ 26V
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 32-HTSSOP
Max Output Power x Channels @ Load 30W x 2 @ 8Ohm

Getting Started

To begin prototyping, ensure the thermal pad is properly soldered to a large copper ground plane for heat dissipation. Configure the gain settings using the dedicated pins and provide adequate decoupling capacitors close to the PVCC pins as recommended in the datasheet. Evaluation modules like the TPA3118D2EVM are available to quickly test audio performance before committing to a custom PCB layout.

TPA3118D2 Family

Part NumberDifferenceStock
TPA3118D2EVM EVM 5
Also available as: TPA3118D2DAP

Also Consider

TPA3116D2DADR TITexas Instruments - Offers higher output power up to 50W per channel for applications requiring more volume.
TPA3110D2PWPR TITexas Instruments - A lower-power 15W alternative for applications where 30W is not required, offering a smaller footprint.