EmbeddedRelated.com
TPS62122DRVR

TITPS62122DRVR

Texas Instruments
Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 75mA 6-WDFN Exposed Pad
Active3,011 in stock

Overview

The TPS62122DRVR is a high-efficiency synchronous step-down converter designed for low-power applications operating from input voltages up to 15V. It provides a regulated output of up to 75mA with an adjustable output voltage range of 1.2V to 5.5V, making it ideal for devices powered by multi-cell batteries or energy harvesting sources.

Why Choose This Part

This regulator features an exceptionally low quiescent current of 11uA and a power-save mode that maintains high efficiency even at light loads. Its wide input voltage range of 2V to 15V and 100 percent duty cycle capability allow for minimal dropout and operation across a broad variety of power sources.

Applications

Energy Harvesting
Efficiently converting erratic power from solar cells or thermal generators into stable rails for low-power sensors.
Battery-Powered IoT Nodes
Extending the life of devices powered by 9V alkaline, Li-MnO2, or Li-SOCI2 batteries.
High-Voltage LDO Replacement
Replacing linear regulators in 12V industrial loops to significantly reduce heat dissipation and power loss.

Key Specifications

Function Step-Down
Topology Buck
Output Type Adjustable
Mounting Type Surface Mount
Package / Case 6-WDFN Exposed Pad
Current - Output 75mA
Number of Outputs 1
Output Configuration Positive
Frequency - Switching Up to 800kHz
Operating Temperature -40degC ~ 85degC (TA)
Synchronous Rectifier Yes
Voltage - Input (Max) 15V
Voltage - Input (Min) 2V
Voltage - Output (Max) 5.5V
Supplier Device Package 6-WSON (2x2)
Voltage - Output (Min/Fixed) 1.2V

Getting Started

Designers should prioritize the placement of the input capacitor close to the VIN and GND pins to minimize noise. Use the TPS62120EVM-640 evaluation module to verify performance and tune the adjustable output voltage via the external resistor divider.

Also Consider

TPS62740DSSR TITexas Instruments - Lower 360nA quiescent current for always-on wearable applications but with a lower 10V maximum input.