EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 14hrs 55min 52sec
Learn More →
TPS78227QDRVRQ1

TITPS78227QDRVRQ1

Texas Instruments
Linear Voltage Regulator IC Positive Fixed 1 Output 150mA 6-WSON (2x2)
Active2,945 in stock

Overview

The TPS78227QDRVRQ1 is an automotive-qualified, ultra-low-power linear regulator that provides a fixed 2.7V output at up to 150mA. It is specifically designed for battery-powered systems where minimizing standby power consumption is critical, featuring a ground current of just 1uA.

Why Choose This Part

The regulator features a remarkably low shutdown current of approximately 18nA and is stable with small 1-uF ceramic capacitors to minimize PCB footprint. Its thermal shutdown and reverse polarity protection ensure robust operation in harsh automotive environments across a wide temperature range of -40C to 125C.

Applications

Automotive Telematics Control Units
Provides efficient power for always-on modules that must minimize battery drain when the vehicle engine is off.
Remote Keyless Entry (RKE)
Ideal for automotive receivers requiring a regulated supply with extremely low quiescent current.
Tire Pressure Monitoring Systems (TPMS)
Used in sensor nodes where long battery life and AEC-Q100 reliability are mandatory.
Infotainment Standby Power
Maintains power to memory or low-power processors during sleep states in vehicle head units.

Key Specifications

PSRR 40dB ~ 15dB (10Hz ~ 1kHz)
Output Type Fixed
Mounting Type Surface Mount
Package / Case 6-WDFN Exposed Pad
Control Features Enable
Current - Output 150mA
Protection Features Over Current, Over Temperature, Reverse Polarity
Number of Regulators 1
Output Configuration Positive
Operating Temperature -40degC ~ 125degC
Voltage - Input (Max) 5.5V
Voltage Dropout (Max) 0.25V @ 150mA
Current - Supply (Max) 8 uA
Supplier Device Package 6-WSON (2x2)
Current - Quiescent (Iq) 1.3 uA
Voltage - Output (Min/Fixed) 2.7V

Getting Started

Designers should place the required 1-uF ceramic input and output capacitors as close to the 6-WSON package pins as possible to ensure stability. The enable pin is CMOS compatible, allowing direct control from a microcontroller to enter a low-power shutdown state.

TPS78227 Family

Part NumberDifferenceStock
TPS78227DRVR DRVR 62,258

Also Consider

MAX15062BATA+T Maxim Integrated - A high-efficiency switching alternative for automotive applications requiring a wider input voltage range.