EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 20hrs 04min 42sec
Learn More →
TPS7A0508PDBVR

TITPS7A0508PDBVR

Texas Instruments
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA SOT-23-5
Active12,230 in stock

Overview

The TPS7A0508PDBVR is an ultra-low-power, 200mA low-dropout (LDO) linear regulator that provides a fixed 0.8V output from an input range of 1.4V to 5.5V. It is specifically designed for battery-operated devices where minimizing quiescent current is critical to extending operational life. The device maintains high accuracy of 1 percent and includes an enable pin for further power savings during shutdown.

Why Choose This Part

The primary advantage is the ultra-low quiescent current of 1uA, which remains low even during dropout. It features excellent transient response despite the low IQ, along with active output discharge and foldback current limiting for robust circuit protection. The compact SOT-23-5 package provides a small footprint for high-density PCB designs.

Applications

Wearable Electronics
Ideal for fitness trackers and smartwatches where space is limited and 1uA quiescent current significantly impacts battery runtime.
Portable Medical Devices
Provides a stable 0.8V rail for low-voltage digital cores in handheld diagnostic equipment.
IoT Sensor Nodes
Supports long-term deployment of remote sensors by minimizing power draw during idle periods.
Battery-Powered Smart Home Devices
Used in wireless thermostats and smoke detectors to regulate power for low-power microcontrollers.

Key Specifications

PSRR 40dB (1kHz ~ 1MHz)
Output Type Fixed
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Control Features Enable
Current - Output 200mA
Protection Features Over Current, Over Temperature, Under Voltage Lockout (UVLO)
Number of Regulators 1
Output Configuration Positive
Operating Temperature -40degC ~ 125degC (TJ)
Voltage - Input (Max) 5.5V
Voltage Dropout (Max) 1.004V @ 200mA
Supplier Device Package SOT-23-5
Current - Quiescent (Iq) 3 uA
Voltage - Output (Min/Fixed) 0.8V

Getting Started

To implement this regulator, place a 1uF ceramic capacitor close to both the input and output pins to ensure stability. The EN pin can be tied to VIN for always-on operation or controlled by a GPIO to reduce shutdown current to 0.1uA. For evaluation, use the TPS7A05EVM-040 evaluation module to test performance metrics like PSRR and load transients.