EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    TSV611ILT
TSV611ILT

TSV611ILT

STMicroelectronics
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SOT-23-5
Active34,705 in stock
Datasheet Digi-Key Compare Prices

Overview

The TSV611ILT is a single operational amplifier featuring rail-to-rail input and output performance with a very low supply current of 10.5uA. It operates over a wide voltage range from 1.5V to 5.5V, making it suitable for low-power and battery-operated electronics. With a gain bandwidth product of 120 kHz and unity-gain stability, it provides reliable signal conditioning in space-constrained designs.

Why Choose This Part

The primary advantage is the combination of ultra-low power consumption and rail-to-rail I/O in a compact SOT-23-5 package. It offers stable performance down to 1.5V, allowing it to operate directly from a variety of battery chemistries while maintaining a high output current capability of approximately 13mA.

Applications

Battery-Powered Instrumentation
Ideal for portable equipment where low current consumption (10.5uA) is critical for extending battery life.
Sensor Signal Conditioning
Utilizes a low input bias current of 1 pA to interface with high-impedance sensors without significant loading errors.
Active Filtering
Acts as a low-frequency filter in systems requiring rail-to-rail swing to maximize dynamic range on low-voltage rails.

Key Specifications

Slew Rate 0.04V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case SC-74A, SOT-753
Current - Supply 10.5uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC
Gain Bandwidth Product 120 kHz
Voltage - Input Offset 4 mV
Supplier Device Package SOT-23-5
Current - Output / Channel 63 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 1.5 V

Getting Started

To evaluate this part, use a standard SOT-23-5 breakout board for breadboarding or prototype onto a custom PCB with a 0.95mm pin pitch. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin to minimize noise in high-gain configurations.

Also Consider

TLV6001IDBVR TITexas Instruments - Offers a higher 1 MHz bandwidth for applications requiring faster response times while maintaining a small SOT-23 footprint.
MCP6001T-I/OT MCHPMicrochip Technology - A widely available general-purpose alternative with a 1 MHz bandwidth and similar rail-to-rail characteristics.

Categories

Analog ICs > Op-Amps