EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 23hrs 33min 00sec
Learn More →
TXS0104EDR

TITXS0104EDR

Texas Instruments
Voltage Level Translator Bidirectional 1 Circuit 4 Channel 24Mbps 14-SOIC
Active4,276 in stock

Overview

The TXS0104EDR is a 4-bit bidirectional voltage level translator designed to bridge communication between devices operating on different logic voltage rails. It supports VCCA ranges from 1.65V to 3.6V and VCCB ranges from 2.3V to 5.5V, making it ideal for interfacing legacy 5V systems with modern low-voltage microcontrollers.

Why Choose This Part

The device features auto-direction sensing, which eliminates the need for a dedicated DIR control pin from the processor. It supports both open-drain and push-pull CMOS outputs, providing flexibility for various digital interface standards at data rates up to 24Mbps.

Applications

I2C Level Shifting
Translating SDA and SCL lines between 1.8V processors and 3.3V or 5V sensors using its open-drain compatible architecture.
SD Card Interfacing
Bridging the 3.3V power requirements of SD cards with low-voltage application processors.
UART Communication
Connecting asynchronous serial interfaces across different voltage domains without requiring a direction control signal.
GPIO Expansion
Shifting general purpose logic levels for status LEDs or button inputs in mixed-voltage systems.

Key Specifications

Features Auto-Direction Sensing
Data Rate 24Mbps
Output Type Open Drain, Push-Pull
Channel Type Bidirectional
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154", 3.90mm Width)
Voltage - VCCA 1.65 V ~ 3.6 V
Voltage - VCCB 2.3 V ~ 5.5 V
Translator Type Voltage Level
Number of Circuits 1
Channels per Circuit 4
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 14-SOIC

Getting Started

To use this part, ensure VCCA is always less than or equal to VCCB and power up VCCA first or simultaneously. Decouple both power rails with 0.1uF capacitors and pull the OE (Output Enable) pin high to enable the device outputs. Since it has internal pull-up resistors, external resistors for I2C may need to be adjusted or omitted depending on the bus speed.

TXS0104 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Output Type Package Temp Range Stock
TXS0104EDR (this part) Open Drain, Push-P.. SOIC-14 -40degC ~ 85degC (.. 4,276
TXS0104EQPWRQ1 Open Drain, Push-P.. TSSOP-14 -40degC ~ 125degC .. —
TXS0104VRUTR Tape & Reel Open Drain, Push-P.. UFQFN-12 -40degC ~ 85degC (.. 3,462
TXS0104VRGYR Open Drain, Push-P.. VFQFN-14 -40degC ~ 85degC (.. 2,792
TXS0104VDR Open Drain, Push-P.. SOIC-14 -40degC ~ 85degC (.. 2,547
TXS0104VBQAR Open Drain, Push-P.. WFQFN-14 -40degC ~ 85degC (.. 2,536
TXS0104VQBQARQ1 Open Drain, Push-P.. WFDFN-14 -40degC ~ 85degC (.. 2,885
TXS0104VPWR Open Drain, Push-P.. TSSOP-14 -40degC ~ 85degC (.. 1,589
TXS0104VQRUTRQ1 Open Drain, Push-P.. UFQFN-12 -40degC ~ 85degC (.. 1,872

Also Consider

TXB0104DR TITexas Instruments - Best for pure push-pull CMOS applications where high-drive strength is not required and open-drain (I2C) support is not needed.