EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 17min 06sec
Learn More →
UC3842BD1R2G

ONUC3842BD1R2G

onsemi
Boost, Flyback Regulator Positive, Isolation Capable Output Step-Up, Step-Up/Step-Down DC-DC Controller IC 8-SOIC
Active10,646 in stock

Overview

The UC3842BD1R2G is a high-performance fixed-frequency current-mode PWM controller designed for off-line and DC-to-DC converter applications. It features a trimmed oscillator for precise frequency control, a high-gain error amplifier, and a high-current totem pole output specifically designed to drive power MOSFETs. The device is optimized for flyback and boost topologies, providing a robust solution for regulated power supply designs.

Why Choose This Part

This controller offers current-mode operation up to 500 kHz with automatic feed-forward compensation and cycle-by-cycle current limiting. It features a very low startup current of 0.3mA and a high-current totem pole output capable of sourcing and sinking up to 1A, which simplifies MOSFET gate drive circuitry.

Applications

Off-line Flyback Converters
Used in AC-to-DC power supplies for consumer electronics and industrial equipment requiring isolated outputs.
DC-to-DC Boost Regulators
Effective for stepping up low-voltage DC rails in battery-powered or distributed power systems.
Switch Mode Power Supplies (SMPS)
Acts as the primary controller for high-efficiency switching regulators in telecom and computing hardware.

Key Specifications

Function Step-Up, Step-Up/Step-Down
Topology Boost, Flyback
Clock Sync No
Output Type Transistor Driver
Mounting Type Surface Mount
Output Phases 1
Package / Case 8-SOIC (0.154", 3.90mm Width)
Control Features Frequency Control
Duty Cycle (Max) 96%
Number of Outputs 1
Output Configuration Positive, Isolation Capable
Frequency - Switching Up to 500kHz
Operating Temperature 0degC ~ 70degC (TA)
Synchronous Rectifier No
Supplier Device Package 8-SOIC
Voltage - Supply (Vcc/Vdd) 10V ~ 30V

Getting Started

To implement this controller, calculate the timing resistor and capacitor for the desired oscillator frequency, typically around 250 kHz for standard designs. Ensure the Vcc supply includes a decoupling capacitor close to the IC pins, and utilize the undervoltage lockout (UVLO) feature to manage startup and shutdown thresholds. Reference designs for standard flyback converters are available from onsemi to assist with transformer selection and feedback loop stability.

Also Consider

UC3843BD1R2G ONonsemi - Lower undervoltage lockout thresholds (8.4V turn-on) compared to the UC3842 (16V turn-on) for low-voltage applications.