UM232R
Overview
The UM232R is a USB to serial UART evaluation module based on the FT232R interface IC. It is designed as a 24-pin DIP module that plugs directly into a standard 0.6-inch wide socket or breadboard, providing a simple way to add USB connectivity to legacy hardware or prototypes. The board handles all USB signaling and protocols on-chip, requiring no USB-specific firmware programming.
Why Choose This Part
This module features an integrated 1024-bit EEPROM and a clock generator output (6-48MHz), reducing the need for external timing components. It supports a wide range of data rates from 300 Baud to 3MBaud and includes built-in level converters to interface with logic ranging from 5V down to 1.8V.
Applications
Key Specifications
Getting Started
To begin, plug the module into a 24-pin DIP socket and connect a USB cable; the unit can be bus-powered or self-powered depending on the jumper settings. FTDI provides royalty-free Virtual COM Port (VCP) and D2XX drivers for most major operating systems. Configure the CBUS pins via the MPROG or FT_PROG utility to utilize features like hardware flow control or LED status indicators.
