EmbeddedRelated.com
    Parts   Test & Debug Tools  JTAG/SWD Debuggers    UMFT230XB-01
UMFT230XB-01

UMFT230XB-01

FTDI, Future Technology Devices International Ltd
FT230X USBmadeEZ-UART, FT-X, X-Chip USB 2.0 to UART Interface Evaluation Board
Active100 in stock
Datasheet Digi-Key Compare Prices

Overview

The UMFT230XB-01 is a compact USB-to-UART evaluation module based on the FT230X interface IC. It is designed to plug directly into a standard 0.1-inch pitch socket, providing a simple bridge between a USB host and a microcontroller or FPGA UART interface.

Why Choose This Part

This module offers a small footprint (45.5mm x 12.1mm) and comes with a pre-fitted 10-pin female receptacle for easy integration. It features integrated 3.3V LDO regulators capable of sourcing 50mA and supports high-speed UART rates up to 3 Mega Baud.

Applications

Microcontroller Debugging
Provides a 3.3V UART interface for serial logging and firmware debugging via a standard USB port.
Legacy System Retrofitting
Integrates USB connectivity into existing hardware designs that use traditional asynchronous serial communication.
USB Battery Charging Detection
Utilizes the FT230X logic to detect the presence of a USB dedicated charging port, allowing for higher current draw in portable devices.
USB Peripheral Development
Serves as a reference design for implementing the FT-X series silicon in custom hardware projects.

Key Specifications

Type Interface
Contents Board(s)
Embedded Yes, ASIC
Function USB 2.0 to UART
Primary Attributes Female Connector
Utilized IC / Part FT230X
Secondary Attributes USB Charging Detection

Getting Started

To use the UMFT230XB-01, install the FTDI VCP (Virtual COM Port) drivers on your host PC to map the USB device as a standard serial port. Connect the module to your target hardware using the 2.54mm pitch pins, ensuring the 3.3V logic levels are compatible with your MCU.

Categories

Test & Debug Tools > JTAG/SWD Debuggers