EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 10hrs 44min 31sec
Learn More →
VIPer22ADIP-E

VIPer22ADIP-E

MPN: VIPER22ADIP-E
STMicroelectronics
Converter Offline Flyback Topology 60kHz 8-DIP
Active32 in stock

Overview

The VIPer22ADIP-E is an offline swith mode power supply (SMPS) primary switcher that combines a dedicated current mode PWM controller with a high voltage Power MOSFET on a single silicon chip. Designed for isolated flyback topologies, it supports power levels up to 12W and features a high voltage breakdown of 730V for robust operation directly from AC mains.

Why Choose This Part

It simplifies design by integrating a 730V breakdown MOSFET and a high-voltage start-up current source, reducing external component count. The fixed 60kHz switching frequency and comprehensive protection features including overtemperature and overvoltage auto-restart ensure reliable thermal management and fault recovery.

Applications

Battery Charger Adapters
Efficient primary-side regulation for portable electronics chargers requiring low standby power.
TV and Monitor Standby Supplies
Provides the low-power auxiliary rail needed for wake-on-remote and control logic in consumer electronics.
Motor Control Auxiliary Power
Generates isolated bias voltages for gate drivers and MCUs in industrial motor drive systems.
Smart Home Appliances
Compact power source for IoT sensors, smart plugs, and white goods control boards.

Key Specifications

Topology Flyback
Mounting Type Through Hole
Power (Watts) 12 W
Package / Case 8-DIP (0.300", 7.62mm)
Fault Protection Current Limiting, Over Temperature, Over Voltage
Output Isolation Isolated
Internal Switch(s) Yes
Voltage - Start Up 14.5 V
Voltage - Breakdown 730V
Frequency - Switching 60kHz
Operating Temperature -40degC ~ 150degC (TC)
Supplier Device Package 8-DIP
Voltage - Supply (Vcc/Vdd) 8V ~ 38V

Getting Started

Designers can evaluate this part by following STMicroelectronics application note AN1488, which provides a complete reference design for a 12V/10W flyback converter. Ensure proper heat sinking via the GND pins and follow layout guidelines for the primary loop to minimize EMI at the 60kHz switching frequency.