EmbeddedRelated.com
XB-9XR-DMUT-051

XB-9XR-DMUT-051

Digi
Cellular Transceiver Module 920.5MHz ~ 928.1MHz Antenna Not Included, U.FL
Active46 in stock

Overview

The XB-9XR-DMUT-051 is a 900 MHz RF module from the Digi XBee XR family designed for the Japanese market, operating between 920.5 MHz and 928.1 MHz. It utilizes the DigiMesh networking protocol to provide reliable mesh connectivity for low-power long-range applications. The module features an ARM Cortex-M4 core and supports secure communication with 256-bit AES encryption.

Why Choose This Part

This module offers high sensitivity of -113 dBm and a 13 dBm output power for excellent link budget in challenging RF environments. It features a very low sleep current of approximately 1.2 microamps, making it suitable for battery-powered end-nodes. The through-hole form factor with a U.FL connector allows for flexible antenna placement and easy integration into industrial hardware.

Applications

Utility Metering
Ideal for wireless meter networks and utility energy management systems where reliable mesh networking is required over a wide area.
Industrial Agriculture
Provides robust data links for remote sensors and irrigation control in large-scale farming environments.
Smart Energy Systems
Used in energy monitoring applications to bridge data from end-nodes to gateways using the DigiMesh protocol.

Key Specifications

Data Rate 110kbps
Frequency 920.5MHz ~ 928.1MHz
Sensitivity -113dBm
Antenna Type Antenna Not Included, U.FL
Power - Output 13dBm
Voltage - Supply 2.1V ~ 3.6V
Serial Interfaces SPI, UART
RF Family/Standard Cellular
Utilized IC / Part EFR32FG13P231F512
Current - Receiving 28mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 79mA

Getting Started

Engineers can evaluate this module using the Digi XBee RR Connectivity Kit or compatible XBee development boards. Configuration is managed through the Digi XCTU software tool, which simplifies network setup, range testing, and firmware updates. Hardware integration is straightforward via UART or SPI interfaces using standard 2.0mm pitch headers.