EmbeddedRelated.com
    Parts    AMD Xilinx Zynq Family    XC7Z007S    XC7Z007S-2CLG400I
XC7Z007S-2CLG400I

XC7Z007S-2CLG400I

AMD (Xilinx)
Same Zynq-7007S device with a different speed grade for designs that need higher timing margins or performance headroom.
Active49 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The XC7Z007S-2CLG400I is an AMD (Xilinx) Zynq-7000 series SoC that integrates a single-core ARM Cortex-A9 processor with an Artix-7 FPGA fabric. It combines embedded processing and programmable logic (about 23K logic cells) in a 400-ball LFBGA package and is offered in an industrial temperature grade. This variant uses the -2 speed grade for higher timing margin or performance headroom compared with slower grades.

Why Choose This Part

This Zynq-7007S combines a real ARM application processor with FPGA fabric in a single device, reducing board-level glue and latency between processor and programmable logic. The -2 speed grade gives additional timing headroom for designs that push I/O bandwidth or require tighter timing compared with slower grades. The industrial temperature rating and integrated peripherals make it practical for deployed embedded and automotive systems.

Applications

Industrial control and motor drive
Use the Cortex-A9 for control logic and the FPGA for deterministic I/O, PWM generation, and high-speed feedback loops.
Automotive and vehicle networking
Integrate CAN, Ethernet and real-time processing on-chip for gateway, sensor fusion or ADAS sensor pre-processing (industrial temperature range supports harsh environments).
Embedded vision pre-processing
Offload image pre-processing, filtering or simple feature extraction into the FPGA while running higher-level algorithms on Linux or bare-metal on the A9 core.
Prototyping mixed-signal and custom peripherals
Implement custom bus bridges, memory controllers (EBI/EMI) or high-speed serial interfaces in fabric while handling management on the processor.

Key Specifications

Speed 766MHz
RAM Size 256KB
Peripherals DMA
Architecture MCU, FPGA
Connectivity CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG
Core Processor Single ARM Cortex-A9 MPCore with CoreSight
Package / Case 400-LFBGA, CSPBGA
Primary Attributes Artix-7 FPGA, 23K Logic Cells
Operating Temperature -40degC ~ 100degC (TJ)
Supplier Device Package 400-CSPBGA (17x17)

Getting Started

Development uses the Xilinx toolchain: Vivado Design Suite for RTL and block design, and Vitis (or Xilinx SDK predecessors) for software development on the Cortex-A9; PetaLinux is commonly used to build Linux images. For hardware bring-up, use an evaluation board or SOM that carries the 7Z007S or a compatible package, plus a JTAG programmer (Xilinx Platform Cable or Digilent JTAG) for bitstream and software load. Consult the device datasheet and Vivado board files when targeting the CLG400 package.

Part of AMD Xilinx Zynq family » XC7Z007S

XC7Z007S Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Speed Stock
XC7Z007S-2CLG400I (this part) 766M 49
XC7Z007S-1CLG400I 667M 922

Also Consider

XC7Z007S-1CLG400I AMD (Xilinx) - Same Zynq-7007S device in the same package with a slower speed grade; choose if you can trade timing/performance headroom for lower cost or supply availability.
XC7Z010-2CLG400I AMD (Xilinx) - Higher-capacity Zynq part with more FPGA resources than the 7Z007S while keeping the same package and similar integration of ARM + FPGA for designs that need additional logic.
XC7Z020-1CLG484I AMD (Xilinx) - Significantly larger Zynq device (more logic, memory and I/O) for advanced designs requiring heavy DSP, larger programmable logic, or expanded peripheral sets.