EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts    XC7Z010-2CLG400I
XC7Z010-2CLG400I

XC7Z010-2CLG400I

AMD (Xilinx)
Higher-capacity Zynq part with more FPGA resources than the 7Z007S while keeping the same package and similar integration of ARM + FPGA for designs that need additional logic.
Active387 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The XC7Z010-2CLG400I is a Zynq-7000 All Programmable SoC that integrates a dual-core ARM Cortex-A9 processor with Artix-7 based programmable logic. Operating at up to 766MHz, this device allows for tight integration between software-driven control and high-speed hardware processing on a single 28nm silicon die. It provides 28,000 logic cells and 256KB of on-chip RAM, making it suitable for applications requiring more logic density than entry-level Zynq variants while maintaining the same 400-pin BGA footprint.

Why Choose This Part

This SoC offers a balanced performance-to-power ratio by combining the familiar ARM ecosystem with customizable hardware acceleration. Its wide operating temperature range of -40C to 100C and integrated peripherals like DMA and TrustZone security make it a robust choice for demanding industrial environments.

Applications

Industrial Vision Systems
Utilize the integrated NEON engines and FPGA logic for real-time image filtering and protocol conversion in industrial cameras.
Software-Defined Radio (SDR)
The FPGA fabric handles high-speed digital signal processing and filtering while the ARM cores manage the network stack and user interface.
Motor Control and Robotics
Implement low-latency control loops in the programmable logic while running higher-level trajectory planning on the dual Cortex-A9 cores.
Industrial Gateway
Leverage dual CAN controllers, Ethernet, and USB OTG peripherals to bridge disparate industrial networks with hardware-accelerated security.

Key Specifications

Speed 766MHz
RAM Size 256KB
Peripherals DMA
Architecture MCU, FPGA
Connectivity CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG
Core Processor Dual ARM Cortex-A9 MPCore with CoreSight
Package / Case 400-LFBGA, CSPBGA
Primary Attributes Artix-7 FPGA, 28K Logic Cells
Operating Temperature -40degC ~ 100degC (TJ)
Supplier Device Package 400-CSPBGA (17x17)

Getting Started

Development typically requires the Xilinx Vivado Design Suite for hardware configuration and Vitis for software development. Hardware engineers often begin prototyping with the Digilent Zybo Z7 or the Avnet MicroZed 7010 board to leverage existing BSPs and reference designs for the CLG400 package.

Also Consider

XC7Z007S-2CLG400I AMD (Xilinx) - A single-core ARM variant that offers a lower power profile for less demanding processing tasks in the same physical package.
The 2026 Embedded Online Conference