Test & Debug Tools
Test & Debug Tools includes oscilloscopes, logic analyzers, programmers and in‑circuit debuggers that help validate hardware and firmware. Effective tooling shortens development cycles by revealing timing issues, signal integrity problems and firmware bugs.
Featured Parts (22 families, 22 parts)
ZD1000
Active
Teledyne LeCroy
The ZD1000 is a 1 GHz active differential probe designed for high-fidelity signal acquisition with Teledyne LeCroy ProBus-equipped oscilloscopes. It features a high 1 Mohm input resistance and an ultr...
Segger Microcontroller Systems
The Segger Flasher PRO (5.17.01) is a professional, processor-based programming tool designed for high-speed production environments. It functions as a stand-alone programmer that stores target data i...
Teledyne LeCroy
The ZD1500 is a 1.5 GHz active differential probe designed for high-frequency signal integrity measurements on Teledyne LeCroy oscilloscopes. It provides a wide dynamic range of plus or minus 8V and a...
J-Link Ultra Plus
8.16.28
SEGSegger Microcontroller
The J-Link Ultra Plus (8.16.28) is a high-speed debug probe designed for professional embedded development across multiple architectures including ARM, Renesas RX, and Microchip PIC32. It is an enhanc...
Segger Microcontroller Systems
The Segger 8.06.09 is a specialized adapter board designed to bridge the standard 20-pin J-Link connector to a 6-pin RJ12 modular interface. This adapter is specifically engineered for debugging targe...
ADIAnalog Devices Inc.
The DC9010B is a dedicated in-circuit and in-system programmer designed for Analog Devices Eterna wireless sensor network products. It provides the necessary interface to load firmware onto LTC5800 ch...
MSO5104
Active
Rigol Technologies
The MSO5104 is a 100 MHz, 4-channel digital oscilloscope from the MSO5000 series designed for benchtop signal analysis. It features a high-depth memory of 200Mpts and a 3.5 ns typical rise time, integ...
ZD500
Active
Teledyne LeCroy
The Teledyne LeCroy ZD500 is a 500 MHz active differential probe designed for high-fidelity measurements in complex circuit environments. It features a 10:1 attenuation ratio and a high 1M Ohm input r...
Segger Microcontroller Systems
The Segger 8.06.19 is a passive adapter board designed to convert the standard J-Link 20-pin 0.1-inch header to a 14-pin 2.0mm pitch JTAG header. This adapter specifically facilitates connection to ta...
Digilent
The Analog Discovery Pro ADP5470 is a high-performance mixed-signal oscilloscope and multi-instrument workstation designed for professional benchtop use. It features four 350 MHz analog channels with ...
T3-DALS-16
Active
Teledyne LeCroy
The T3-DALS-16 is a 16-channel Mixed Signal Oscilloscope (MSO) logic probe lead set designed for use with Teledyne LeCroy T3DSO700HD series oscilloscopes. It adds digital timing analysis capabilities ...
Segger Microcontroller Systems
The Segger 8.06.13 is a specialized adapter board designed to sit between a J-Link debug probe and the target hardware. It breaks out all debug signals to accessible test points and includes jumpers f...
Segger J-Link JTAG Isolator
8.06.12
Segger Microcontroller Systems
The Segger 8.06.12 is a JTAG Isolator board designed to provide electrical isolation between a J-Link debug probe and the target hardware. It features a 20-pin connector and protects the emulator and ...
Owon Technology Lilliput Electronics (USA) Inc
The MSO8202T by Owon is a 200 MHz benchtop oscilloscope featuring 2 analog channels and a 2 GSa/s sampling rate. It includes a color LCD for signal visualization and a USB interface for data transfer ...
Analog Discovery Pro ADP5490
411-003
Digilent
The Digilent ADP5490 is a high-performance Mixed Signal Oscilloscope (MSO) designed for professional-grade benchtop testing and automated measurement. It features four 500 MHz analog channels with 8-b...
J-Link JTAG Isolator
8.06.15
Segger Microcontroller Systems
The Segger 8.06.15 is a JTAG isolator designed to be placed between a Segger J-Link debug probe and the target hardware. It provides electrical isolation between the emulator and the target to protect...
Acute Technology, Inc.
The PX2816B is a PC-based multi-function instrument that combines the capabilities of a high-speed logic analyzer and a digital signal generator. It connects via USB to provide engineers with a compac...
Teledyne LeCroy
The T3DSO3024HD is a high-definition 200 MHz, 4-channel benchtop oscilloscope featuring 12-bit vertical resolution for high signal fidelity. This promotional bundle includes a fully loaded Mixed Signa...
Teledyne LeCroy
The Teledyne LeCroy T3DSO3104HD is a high-performance 1 GHz benchtop oscilloscope featuring 12-bit High Definition (HD) technology for superior signal fidelity. It provides 4 channels with an interlea...
T3DSO3034HD
T3DSO3034HD PROMO1
Teledyne LeCroy
The Teledyne LeCroy T3DSO3034HD is a high-definition 350 MHz benchtop oscilloscope featuring 12-bit vertical resolution for precise signal characterization. This PROMO1 version includes a fully loaded...
Teledyne LeCroy
The T3DSO3054HD PROMO1 is a 500 MHz high-definition benchtop oscilloscope featuring 4 analog channels and a high-resolution 12-bit ADC architecture. This promotional bundle includes the full Mixed Sig...
AC102015 Debugger Adapter Board
AC102015
MCHPMicrochip Technology
The AC102015 is a versatile debugger adapter board designed to bridge various Microchip development tools and debuggers with target hardware. It facilitates connections between standard 0.100-inch (2....
