Update true-time debugger

Started by pascal_derex October 1, 2005
Hi,

I'm workin' a MC9S12DT128 on my testcard with Code Warrior true-time
debugger and a P&E USB-ML-12 rev A multilink and the derivative to
select for is non present in the debugger. So I'm using for the moment
the MC9S12DT128B derivative...
Is it correct or could that cause some errors in the debugging?
And could I update my true-time debugger or my multilink to adapt the
debugging to a MC9S12DT128?

Regards.



Hi Pascal.

This is ok for programming/debugging.
However, I will check internally about this discrepancy. MC9S12DT128 and
MC9S12DT128B are different silicon masks and the MC9S12DT128 is definitely
missing in selections.

Regards,
Gilles
>Hi,
>
>I'm workin' a MC9S12DT128 on my testcard with Code Warrior true-time
>debugger and a P&E USB-ML-12 rev A multilink and the derivative to
>select for is non present in the debugger. So I'm using for the moment
>the MC9S12DT128B derivative...
>Is it correct or could that cause some errors in the debugging?
>And could I update my true-time debugger or my multilink to adapt the
>debugging to a MC9S12DT128?
>
>Regards.




Thank you Gilles
----- Original Message -----
From: Gilles Blanquin
To: 68HC12@68HC...
Sent: Wednesday, October 12, 2005 9:30 AM
Subject: Re: [68HC12] Update true-time debugger
Hi Pascal.

This is ok for programming/debugging.
However, I will check internally about this discrepancy. MC9S12DT128 and
MC9S12DT128B are different silicon masks and the MC9S12DT128 is definitely
missing in selections.

Regards,
Gilles
>Hi,
>
>I'm workin' a MC9S12DT128 on my testcard with Code Warrior true-time
>debugger and a P&E USB-ML-12 rev A multilink and the derivative to
>select for is non present in the debugger. So I'm using for the moment
>the MC9S12DT128B derivative...
>Is it correct or could that cause some errors in the debugging?
>And could I update my true-time debugger or my multilink to adapt the
>debugging to a MC9S12DT128?
>
>Regards.
------
YAHOO! GROUPS LINKS

a.. ------