Store data in Flash of MC9S08LG32

Started by yugal November 17, 2010
Hi All,
I am using MC9S08LG32 and want to use internal flash of the processor to store(read/write both) some Application data while running time. i don't want to use external eeprom as my data is not that big.
my application is also running from the same flash.
Is there any way i can achive this goal and how.
Thanks for your help.
YKGupta

You have to copy the routines to program the flash from flash to RAM and
operate out of RAM. I believe there are appnotes about this on the
Freescale site.

----- Original Message -----
From: "yugal"
To: <6...>
Sent: Wednesday, November 17, 2010 4:32 AM
Subject: [68HC12] Store data in Flash of MC9S08LG32
Hi All,
I am using MC9S08LG32 and want to use internal flash of the processor to
store(read/write both) some Application data while running time. i don't
want to use external eeprom as my data is not that big.
my application is also running from the same flash.
Is there any way i can achive this goal and how.
Thanks for your help.
YKGupta