HCS12 Loader/Debugger Linux

Thank you John, I will try that.

From: mailto:6...
Sent: Friday, November 06, 2015 9:05 AM
To: 6...
Subject: RE: [68HC12] IDE for 64 bit computers

I’m using Freescale Codewarrier 5.9 IDE on WIN-7 64 bit programming the 9S12xdp512. Free for up to 32K code space. Depending on the purchase/service module you can also get 64K or full versions.
Coupled with the P&E programmer debugger it’s a very usable infrastructure. It may not work on anything past WIN-7.
John

From: 6... [mailto:6...]
Sent: November-05-15 10:44 PM
To: 6...
Subject: [68HC12] IDE for 64 bit computers
Hi,
I used to work with miniIDE for compilation and download purposes with 32 bit computers.
I have Adapt 9s12dp256 board and it was quite convenient.
The problem is that miniIDE does not work with 64 bit computers.
Does someone have an idea about an alternative software?
Thanks,
Eli

[Non-text portions of this message have been removed] Start a New Thread

Greetings,

Codewarrior Classic does work with Win 7/8.1/10 and 64-bit machines if you download the P&E patch I have created:
http://www.pemicro.com/faqs/ faq_view.cfm?id!1&menu_id= faqs http://www.pemicro.com/faqs/faq_view.cfm?id!1&menu_ids

Also, I am working with Freescale to get Codewarrior classic for HC12 to be updated on November 20th to work with not only all of the old but also the latest P&E USB Multilinks and cyclones, the latest operating systems, latest bug fixes and features. With this new update, you would not need to use my patch to get it working on the latest operating systems or latest hardware interfaces.

Kind regards,
Takao Yamada

Test and Design Engineer

P&E Microcomputer Systems Start a New Thread

Thank you for your efforts in trying to bring CodeWarrier Classic into the modern age.

I’m curious though. In Device Manager on my WIN-7 64 bit system my Multilink FX shows up under Jungo as USB Multilink 2.0 and WinDriver. Since I can program and debug with this what would updating the DLLs do for me?

Thanks
John


From: 6... [mailto:6...]
Sent: November-06-15 7:30 AM
To: 6...
Subject: RE: [68HC12] IDE for 64 bit computers

Greetings,

Codewarrior Classic does work with Win 7/8.1/10 and 64-bit machines if you download the P&E patch I have created:
http://www.pemicro.com/faqs/ faq_view.cfm?id=211&menu_id= faqs

Also, I am working with Freescale to get Codewarrior classic for HC12 to be updated on November 20th to work with not only all of the old but also the latest P&E USB Multilinks and cyclones, the latest operating systems, latest bug fixes and features. With this new update, you would not need to use my patch to get it working on the latest operating systems or latest hardware interfaces.

Kind regards,

Takao Yamada

Test and Design Engineer
P&E Microcomputer Systems

[Non-text portions of this message have been removed]


Posted by: "John Dammeyer"



Start a New Thread