Re: : Programming the flash in EVB - HC912DG128

Started by Dr.D.C.Bandara December 14, 2002
Dear All,
I recently bought an EVB from Motorola containing HC912DG128 chip and the
SDI debug tool. But I want to use the board with the debugger 12. The manual
says that the board is provided with flash unprogrammed. Can you tell me in
detail how to put debug12 code in the EVB's flash.

Please help me at earliest convenience.

Bandara



Dr. Bandara,

A version of D-Bug12 for the MC68HC912DG128 does not exist. D-Bug12 v2.1.0 runs
on the MC68HC912B32, v3.0.0
runs on the MC68HC912D60(A) and v4.0.0 runs on the HCS12 256K and 128K devices.
All three versions running in
POD mode support the MC68HC912DG128 as a target device, however, v2.1.0 does
NOT support the 'A' suffix HC12
devices.

Regards,
Gordon

"Dr.D.C.Bandara" wrote:

> Dear All,
> I recently bought an EVB from Motorola containing HC912DG128 chip and the
> SDI debug tool. But I want to use the board with the debugger 12. The manual
> says that the board is provided with flash unprogrammed. Can you tell me in
> detail how to put debug12 code in the EVB's flash.
>
> Please help me at earliest convenience.
>
> Bandara >
>
> -------------------- >
> ">http://docs.yahoo.com/info/terms/

--
===============================================================
Gordon Doughman Ph: 937-438-6811
Motorola Semiconductor Fax: 937-434-7457
Field Applications Engineer Pager: 800-759-8352 Pin: 1304089
Suite 175
3131 Newmark Drive
Miamisburg, OH 45342

Check out my HC12 book at:
http://www.rtcgroup.com/books/