newbie here and need help on programming flash memory.

Started by Hero August 20, 2003
hey guys and gals,

this question has probably been asked before but i'm doing this
project for school and i want to store my programs into flash
memory. However, i have no idea of going about it. Do i need some
special software or something like that to program the flash memory
on my microcontroller board.

processor: MC9S12D256
board: CML12SDP256

Thanks in advance.

Hero



Hi.

The CML12SDP256 is an AXIOM board, having an Axiom onboard monitor + Axiom
tools to debug.

Have a look at: www.axman.com

Text copy from Axiom's site:

The Axiom development system provides for low cost software debugging with
the use
of a Debug Monitor installed in the internal or external memory. Operation
allows the
user to locate code in the On-Board RAM, set Break Points, Trace, and
display or
modify registers or memory. After code is operational the user may relocate
the code
and program the MC9S12DP256 internal Flash for dedicated operation of new
software. No
additional hardware or software is required. Board is compatible with
standard HC12
BDM pods and software compilers that provide an integrated debug interface. Regards,
Gilles
At 11:36 PM 8/20/2003, you wrote:
>hey guys and gals,
>
>this question has probably been asked before but i'm doing this
>project for school and i want to store my programs into flash
>memory. However, i have no idea of going about it. Do i need some
>special software or something like that to program the flash memory
>on my microcontroller board.
>
>processor: MC9S12D256
>board: CML12SDP256
>
>Thanks in advance.
>
>Hero >
>-------------------- >
>">http://docs.yahoo.com/info/terms/