Announcement: NoICE now supports inDART BDM pod

Started by John Hartman NoICE July 14, 2004
NoICE debugger version 8.2 is now available.

This version adds support for the SofTec Microsystems inDART-HCS12 and
PK-HCS12 BDM pods for the HC12 and HCS12.

NoICE for HC12 also supports the Elektronikladen ComPOD12, the P&E
MULTILINK, the Technological Arts microBDM12SX, and the Kevin Ross BDM12.

An instruction set simulator is also included.

NoICE is available for the HC12, HC08, HC11, MSP430, 8051, 65(C)02, and
Z80/Z180.

The download version is fully functional for 30 days.

For more information, or to download NoICE, go to http://www.noicedebugger.com

Best regards, John Hartman

NoICE Debugging Tools
http://www.noicedebugger.com



For those of use who have 8.00 is it worth downloading an
upgrade? Bug fixes?

Thanks,

John Dammeyer Wireless CAN with the CANRF module now available.
http://www.autoartisans.com/products
Automation Artisans Inc.
Ph. 1 250 544 4950 > -----Original Message-----
> From: John Hartman (NoICE) [mailto:]
> Sent: Tuesday, July 13, 2004 6:48 PM
> To:
> Subject: [68HC12] Announcement: NoICE now supports inDART BDM
pod
>
>
> NoICE debugger version 8.2 is now available.
>
> This version adds support for the SofTec Microsystems
> inDART-HCS12 and
> PK-HCS12 BDM pods for the HC12 and HCS12.
>
> NoICE for HC12 also supports the Elektronikladen ComPOD12, the
P&E
> MULTILINK, the Technological Arts microBDM12SX, and the Kevin
> Ross BDM12.
>
> An instruction set simulator is also included.
>
> NoICE is available for the HC12, HC08, HC11, MSP430, 8051,
> 65(C)02, and
> Z80/Z180.
>
> The download version is fully functional for 30 days.
>
> For more information, or to download NoICE, go to
> http://www.noicedebugger.com
>
> Best regards, John Hartman
>
> NoICE Debugging Tools
> http://www.noicedebugger.com >
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
> Now with Pop-Up Blocker. Get it for free!
> http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dN_tlB/TM
> --------------------------
> ------~- > Yahoo! Groups Links >
>





Will it install over previous (licensed) versions
and maintain the license?
Nick Allen

> -----Original Message-----
> From: John Hartman (NoICE) [mailto:]
> Sent: Tuesday, July 13, 2004 9:48 PM
> To:
> Subject: [68HC12] Announcement: NoICE now supports inDART BDM pod > NoICE debugger version 8.2 is now available.
>
> This version adds support for the SofTec Microsystems
> inDART-HCS12 and
> PK-HCS12 BDM pods for the HC12 and HCS12.
>
> NoICE for HC12 also supports the Elektronikladen ComPOD12, the P&E
> MULTILINK, the Technological Arts microBDM12SX, and the Kevin
> Ross BDM12.
>
> An instruction set simulator is also included.
>
> NoICE is available for the HC12, HC08, HC11, MSP430, 8051,
> 65(C)02, and
> Z80/Z180.
>
> The download version is fully functional for 30 days.
>
> For more information, or to download NoICE, go to
> http://www.noicedebugger.com
>
> Best regards, John Hartman
>
> NoICE Debugging Tools
> http://www.noicedebugger.com >
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
> Now with Pop-Up Blocker. Get it for free!
> http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dN_tlB/TM
> --------------------------
> ------~- > Yahoo! Groups Links




>For those of use who have 8.00 is it worth downloading an
>upgrade? Bug fixes?

Changes since 8.0, with HC12 stuff in bold:

Version 8.2 release
- Support for SofTec Microsystems inDART-HCS12 and PK-HCS12
- Improved support for MSP430 clock control during debugging
- Show/change S2FORMAT via checkbox in LOAD dialog
- Revise BDM paged access scheme to reduce number of BDM commands (speed
up, especially when target is running)
- New version of unit12 DLL from P&E
- Support for HC908AP32, AP64, and GZ16 (tested by customers)
- Bug fix: work around error from TI DLL when read or writing past FFFF
- Bug fix: correct reset after MSP430 Flash burn
- Bug fix: allow spaces in path names for CAPTURE and RECORD
- Bug fix: ancient typo in 8051 monitor (interrupt 19)

Version 8.1 release
- Fix really stupid bug in demo mode (sorry)
- Fix several instruction errors in HC12 simulator
- Revise MSP430 jtag code to work around issues in latest TI DLL
- Add ability to leave MSP430 running when NoICE exits
- Add list of targets and their features to MSP430 jtag setup dialog
- Add "show target comm" to MSP430 jtag
Best regards, John Hartman

NoICE Debugging Tools
http://www.noicedebugger.com



>Will it install over previous (licensed) versions
>and maintain the license?

It will, with one caveat: Every few years I retire old license codes,
mostly so that stolen or "shared" licenses won't work forever. If your
license doesn't begin with "QT...", it will not work the NoICE versions
after 8.1.

In that case, NoICE will show you as unregistered, and you will get a
30-day demo. Send me your old license key and I will send you a new one at
no charge. > > -----Original Message-----
> > From: John Hartman (NoICE) [mailto:]
> > Sent: Tuesday, July 13, 2004 9:48 PM
> >
> > NoICE debugger version 8.2 is now available.
> >
> > This version adds support for the SofTec Microsystems
> > inDART-HCS12 and
> > PK-HCS12 BDM pods for the HC12 and HCS12.
> >
> > NoICE for HC12 also supports the Elektronikladen ComPOD12, the P&E
> > MULTILINK, the Technological Arts microBDM12SX, and the Kevin
> > Ross BDM12.
> >
> > An instruction set simulator is also included.
> >
> > NoICE is available for the HC12, HC08, HC11, MSP430, 8051,
> > 65(C)02, and
> > Z80/Z180.
> >
> > The download version is fully functional for 30 days.
> >
> > For more information, or to download NoICE, go to
> > http://www.noicedebugger.com

Best regards, John Hartman

NoICE Debugging Tools
http://www.noicedebugger.com