Forums

Writing to EERRPM after flashing

Started by sunil1ind December 6, 2004

We are using 68hcs12 processor. I am able to program the EEPROM
locations using emulator. But after flashing using the same code i am
not able to program eeprom. What could be the problem?




Hallo ??? if you use the emulator, some features (like the COP) are disabled. After flashing your device it could be, that such a features occurs and your EEPROM routine crashs. Look at the datasheet of your processor to find such a feature(s). ;-) --
Patrick Gempeler <>
ProEda AG Datenmanagement <http://www.proeda.ch/>
Bollstr. 32, CH-3076 Worb
Tel +41 31 838 45 00, Fax +41 31 838 45 40
----- Original Message -----
From: sunil1ind
To:
Sent: Monday, December 06, 2004 2:09 PM
Subject: *****SPAM***** [68HC12] Writing to EERRPM after flashing
We are using 68hcs12 processor. I am able to program the EEPROM
locations using emulator. But after flashing using the same code i am
not able to program eeprom. What could be the problem?

------
Yahoo! Groups Links

a.. To