hello, I am kinda new with using development boards, and the last couple of days
I am trying to play with the device I bought. But I am not able to acually
program something in the device.
I am working with Windows XP, SP3, 32bit
The device I bought was from Olimex, :
STM32-P107
with the JTAG cable: ARM-USB-Tiny-H
I followed the instructions in the manual on the cd. It installes Eclipse and
OpenOCD 0.3.0
But when I want to run the dev after building all (software is provided with a
basic program) I get the folowing messages in the console
If I also use the debug mode I see the folowing message in the console:
and
I know by searching on this forum, that there were other people with this
problem, and I have red them all but somehow I am doing something wrong
Can anybody help me how to fix this problem so I can program software in the
device? Also help me what .cfg files I have to change to make everything
work?
If you need more info Ill supply them.
help connecting STM32-P107 with ARM-USB-Tiny-H
Started by ●April 8, 2011
Reply by ●April 8, 20112011-04-08
<<
STM32-P107 prototype board provides easy way for developing and prototyping
with the new STM32F107VCT6 connectivity line microcontroller, produced by
STMicroelectronics
>>
For your information, this forum is related to ATMEL AT91 products, and I am
not sure that you can use the 9260 config file with this unit.
Eric
De : A... [mailto:A...] De la part de
Richard Leenheer
Envoy: vendredi 8 avril 2011 10:38
: A...
Objet : [AT91SAM] help connecting STM32-P107 with ARM-USB-Tiny-H
hello, I am kinda new with using development boards, and the last couple of
days I am trying to play with the device I bought. But I am not able to
acually program something in the device.
I am working with Windows XP, SP3, 32bit
The device I bought was from Olimex, :
STM32-P107
with the JTAG cable: ARM-USB-Tiny-H
I followed the instructions in the manual on the cd. It installes Eclipse
and OpenOCD 0.3.0
But when I want to run the dev after building all (software is provided with
a basic program) I get the folowing messages in the console
If I also use the debug mode I see the folowing message in the console:
and
I know by searching on this forum, that there were other people with this
problem, and I have red them all but somehow I am doing something wrong
Can anybody help me how to fix this problem so I can program software in the
device? Also help me what .cfg files I have to change to make everything
work?
If you need more info Ill supply them.
STM32-P107 prototype board provides easy way for developing and prototyping
with the new STM32F107VCT6 connectivity line microcontroller, produced by
STMicroelectronics
>>
For your information, this forum is related to ATMEL AT91 products, and I am
not sure that you can use the 9260 config file with this unit.
Eric
De : A... [mailto:A...] De la part de
Richard Leenheer
Envoy: vendredi 8 avril 2011 10:38
: A...
Objet : [AT91SAM] help connecting STM32-P107 with ARM-USB-Tiny-H
hello, I am kinda new with using development boards, and the last couple of
days I am trying to play with the device I bought. But I am not able to
acually program something in the device.
I am working with Windows XP, SP3, 32bit
The device I bought was from Olimex, :
STM32-P107
with the JTAG cable: ARM-USB-Tiny-H
I followed the instructions in the manual on the cd. It installes Eclipse
and OpenOCD 0.3.0
But when I want to run the dev after building all (software is provided with
a basic program) I get the folowing messages in the console
If I also use the debug mode I see the folowing message in the console:
and
I know by searching on this forum, that there were other people with this
problem, and I have red them all but somehow I am doing something wrong
Can anybody help me how to fix this problem so I can program software in the
device? Also help me what .cfg files I have to change to make everything
work?
If you need more info Ill supply them.