Re: Creating a BCD output

Started by Neil Jepsen April 10, 2003
Jason
Email me a block diagram of what you want to do.
neil jasongarbus wrote:

> HELP,
> I'm new to basic stamps and have a project in mind that our rocketry
> club needs to build. We would like to use a 3x4 matrix keypad as a
> master selector for our launch pads.
>
> At present our selector is a rotary switch that we feed out into our
> field box as a 6-bit BCD code and at the far end we have a 6 Bit
> Binary 1 of 64 decoder.
>
> What we want to do is use a basicx to decode the telephone type
> keypad to the 6-Bit BCD information. The stamp should hold the
> outputs high until a reset "the # key"
>
> Any help with the code would be a great help. The logic level
> componets are ready to go all we need is the Basicx program help > Thanks
> Jason
>
>




HELP,
I'm new to basic stamps and have a project in mind that our rocketry
club needs to build. We would like to use a 3x4 matrix keypad as a
master selector for our launch pads.

At present our selector is a rotary switch that we feed out into our
field box as a 6-bit BCD code and at the far end we have a 6 Bit
Binary 1 of 64 decoder.

What we want to do is use a basicx to decode the telephone type
keypad to the 6-Bit BCD information. The stamp should hold the
outputs high until a reset "the # key"

Any help with the code would be a great help. The logic level
componets are ready to go all we need is the Basicx program help Thanks
Jason