BasicX Version 2.1

Started by basicxgroup September 26, 2003
Frank,

I downloaded the new version today and I had two problems.

1. I Downloaded two times:
"BasicX Software Setup - Program Only
Includes Downloader/Compiler/Editor only. Extract and run setup.exe.
Program Setup 1 of 1 - 4MB"

but when I extract with WinZip I receive the message:

"bad CRC 40451d85 (should be a33fe09b)"

2. Then I downloaded the:

"BasicX Software Setup - Complete
Includes Downloader/Compiler/Editor, BasicX Documentation, Example
Files, Application Notes, and ATMEL docs. Extract and run setup.exe.
Complete Setup 1 of 1 - 21MB"

This was OK and after setup, I tried to generate a VB6 project using
the HelloWorld BasicX project. I received the message:

"New VB project created: HelloWorld.vpb"

but in the VB_Support file there is no HelloWorld.vpb

I tried to open the TenplateProject.vpb (in BinVB file) with VB6 -
SP5, but I received the message:

"The project file 'C:\Arquivos de
programas\BasicX\BinVB\TemplateProject.vpb' is corrupt, and can't be
loaded" Filippo Pardini



From: basicxgroup <>

> 1. I Downloaded two times:
> "BasicX Software Setup - Program Only
> Includes Downloader/Compiler/Editor only. Extract and run
setup.exe.
> Program Setup 1 of 1 - 4MB"
>
> but when I extract with WinZip I receive the message:
>
> "bad CRC 40451d85 (should be a33fe09b)"

OK, we'll look at this.

> "New VB project created: HelloWorld.vpb"
>
> but in the VB_Support file there is no HelloWorld.vpb

The VBP file should be in the same directory as the BXP file.

> I tried to open the TenplateProject.vpb (in BinVB file) with
> VB6 - SP5, but I received the message:
>
> "The project file 'C:\Arquivos de
> programas\BasicX\BinVB\TemplateProject.vpb' is corrupt,
> and can't be loaded"

That file is just a template file, and is used as an input to the
VB project generator. Files in any of the Bin* directories
generally should not be touched.

-- Frank Manning
-- NetMedia, Inc.




> > "New VB project created: HelloWorld.vpb"
> >
> > but in the VB_Support file there is no HelloWorld.vpb
>
> The VBP file should be in the same directory as the BXP file.

OK, I get It and it worked fine!
Filippo Pardini