LCD+ display corruption

Started by mr_sallen January 16, 2005

I'm using the BasicX's hardware serial port to read real-time GPS data
at 4800 baud then displaying summary info on the LCD+ using software
serial output at 9600bps. I had to resort to using hardware serial to
read the GPS because software serial was dropping chars. Anyway, I'm
now getting a great deal of corruption when writing to the LCD+. Is
there any way to troubleshoot this? It wasn't happening originially
then something changed in the program (no idea what) and the problems

I'm also driving a couple of servos in a separate task if that's at
all relevant.