eeprom expansion

Started by rauseo82 February 2, 2006
i need much more storage space than the 32kb that is provided on my 
bx24.   i have been looking over old posts and so far the only way ive 
found is to switch the existing 32k eeprom with a 64k eeprom.  however 
i do not have the resources to change out surface mount components.  i 
need the maximum amount of storage space possible.  does anyone know 
how to add more storage space?

thanks,
steve
	
If you need the EEPROM for data storage and not for program memory,
consider an outboard EEPROM.

I have an example at http://www.phanderson.com/bx24/spieeprom.html

P H Anderson, http://www.phanderson.com/basicx/
	--- In basicx@basi..., "rauseo82" <rauseo82@...> wrote:
>
> i need much more storage space than the 32kb that is provided on my 
> bx24.   i have been looking over old posts and so far the only way ive 
> found is to switch the existing 32k eeprom with a 64k eeprom.  however 
> i do not have the resources to change out surface mount components.  i 
> need the maximum amount of storage space possible.  does anyone know 
> how to add more storage space?
> 
> thanks,
> steve
>
	
A Dallas 1 wire device might also work, check out this link -> 
http://www.maxim-ic.com/1-Wire.cfm to see what is offered and more 
D1Wire info on Mr Andersons website => 
http://www.phanderson.com/bx24 .

If you want to go hog wild* do a google search for SD Card Serial, 
I'm offline right now but guessing you could find several that might 
work.

Good Luck,

Kmac

* Finally got "hog wild" into a posting!!

--- In basicx@basi..., "pha555" <pha@...> wrote:
>
> 
> If you need the EEPROM for data storage and not for program memory,
> consider an outboard EEPROM.
> 
> I have an example at http://www.phanderson.com/bx24/spieeprom.html
> 
> P H Anderson, http://www.phanderson.com/basicx/
> 
> 
> --- In basicx@basi..., "rauseo82" <rauseo82@> wrote:
> >
> > i need much more storage space than the 32kb that is provided on 
my 
> > bx24.   i have been looking over old posts
and so far the only 
way ive 
> > found is to switch the existing 32k eeprom
with a 64k eeprom.  
however 
> > i do not have the resources to change out
surface mount 
components.  i 
> > need the maximum amount of storage space
possible.  does anyone 
know 
> > how to add more storage space?
> > 
> > thanks,
> > steve
> >
>