Dallas DS2404

Started by n0ure March 4, 2006
Anyone have any BASICX code for this RTC/MEM ?

JC
	
Surprised no one responded to this? Here are a couple of links to get you
started, look for the Dallas sample code and rework it for the DS2404.

http://www.phanderson.com/basicx/

http://www.basicx.com/

Post up again if you need additional help. It has been a couple of months
since I worked on DS1Wire routines but will try to help after you give it a
go and get stuck.
	-----Original Message-----
From: basicx@basi... [mailto:basicx@basi...]On Behalf Of
n0ure
Sent: Saturday, March 04, 2006 9:47 AM
To: basicx@basi...
Subject: [BasicX] Dallas DS2404
	Anyone have any BASICX code for this RTC/MEM ?

JC
	Yahoo! Groups Links
	
Thanks Keith.

I've been at those sites for weeks.
Nothing speciffic for the 2404.
Hopefully something will show up.

Else looks like I'll roll new code.
I need to get my graphic LCD working well first,
then on to the 1-wire.

JC

--- In basicx@basi..., "Keith McKibbin" <kmckibbin@...> 
wrote:
>
> Surprised no one responded to this? Here are a couple of links to 
get you
> started, look for the Dallas sample code and
rework it for the 
DS2404.
> 
> http://www.phanderson.com/basicx/
> 
> http://www.basicx.com/
> 
> Post up again if you need additional help. It has been a couple of 
months
> since I worked on DS1Wire routines but will try to
help after you 
give it a
> go and get stuck.
> 
> 
> -----Original Message-----
> From: basicx@basi... [mailto:basicx@basi...]On 
Behalf Of
> n0ure
> Sent: Saturday, March 04, 2006 9:47 AM
> To: basicx@basi...
> Subject: [BasicX] Dallas DS2404
> 
> 
> Anyone have any BASICX code for this RTC/MEM ?
> 
> JC
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
>
	
JC,

Yea, I ended up rolling my own 1-wire routines to get what I wanted. My
approach was to write subroutines for each command.

I do plan on using a 2404 in a couple of weeks, haven't coded specific to it
yet. Shoot me an email when you get started on the 2404, maybe our schedules
will line up.

Got to admit it is a nice chip => From the datasheet: "The DS2404
contains a
unique lasered ROM, real-time clock/calendar, interval timer, cycle counter,
programmable interrupts, and 4096-bits of SRAM."

Keith

-----Original Message-----
From: basicx@basi... [mailto:basicx@basi...]On Behalf Of
n0ure
Sent: Monday, March 06, 2006 12:36 PM
To: basicx@basi...
Subject: [BasicX] Re: Dallas DS2404
	Thanks Keith.

I've been at those sites for weeks.
Nothing speciffic for the 2404.
Hopefully something will show up.

Else looks like I'll roll new code.
I need to get my graphic LCD working well first,
then on to the 1-wire.

JC

--- In basicx@basi..., "Keith McKibbin" <kmckibbin@...>
wrote:
>
> Surprised no one responded to this? Here are a couple of links to
get you
> started, look for the Dallas sample code and
rework it for the
DS2404.
>
> http://www.phanderson.com/basicx/
>
> http://www.basicx.com/
>
> Post up again if you need additional help. It has been a couple of
months
> since I worked on DS1Wire routines but will try to
help after you
give it a
> go and get stuck.
>
>
> -----Original Message-----
> From: basicx@basi... [mailto:basicx@basi...]On
Behalf Of
> n0ure
> Sent: Saturday, March 04, 2006 9:47 AM
> To: basicx@basi...
> Subject: [BasicX] Dallas DS2404
>
>
> Anyone have any BASICX code for this RTC/MEM ?
>
> JC
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
	Yahoo! Groups Links