Forums

New BS2 owner wanting to convert over

Started by Mike November 10, 2008
Hey Guys,

I am a new BS2 owner and I love the chip except I ran out of the 2K
memory. I am working on a DTMF to Iambic Morse code project.
Eventually I want to go from DTMF to I2C bus running a SI570
programmable osc.
How had will it be to convert from my BS2 code. From what I can gather
the chip should be just a pin for pin on the hardware end?

Thanks for the help

Mike WA3O
The BasicX 24 is pin for pin identical. If you have a carrier board
for the Stamp you can just pop it in. The coding is very different,
though easily learned and more powerful in that it is closer to MS
Visual Basic and permits multi-tasking.

Kent

--- In b..., "Mike" wrote:
>
> Hey Guys,
>
> I am a new BS2 owner and I love the chip except I ran out of the 2K
> memory. I am working on a DTMF to Iambic Morse code project.
> Eventually I want to go from DTMF to I2C bus running a SI570
> programmable osc.
> How had will it be to convert from my BS2 code. From what I can gather
> the chip should be just a pin for pin on the hardware end?
>
> Thanks for the help
>
> Mike WA3O
>