Forums

Communication issue

Started by MAOV_98 August 9, 2013
I started using the BX24 recently, I acquired the USB-Serial adapter from Netmedia and after sometime is stopped working, (error code 10) was the reason, doing some research I found that this was caused by counterfeit Prolific hardware, so I decided to buy another USB-Serial adapter from an authorized Prolific dealer, I installed the driver and the error code disappeared, however I do not get communication with the BX24 processor now I get the error code 5: "Unable to halt BasicX"
SO now I have invested almost 50 bucks and cannot communicate with the processor.
Any suggestion?