Hi there,
I want to connect the DSP with a LCD and a keypad.
When switched on the user is asked about certain parameters, which he can feed
into, using the keypad. The collected data has to be transmitted to the DSP and
stored in the variables until a new input has been made.
Does anyone know how I could implement that?
Which Hardware could I use and which interface should I use for data transfer
(e.g. CAN-BUS)?
Thanks for your help, Greetings
_____________________________________
Connect F2812 to LCD+keypad
Started by ●February 2, 2009
Reply by ●February 2, 20092009-02-02
Hi,
Does I2C not work for you?
greetings Mike
Hi there,
>
>I want to connect the DSP with a LCD and a keypad.
>When switched on the user is asked about certain parameters, which he can feed into, using the keypad. The collected data has to be transmitted to the DSP and stored in the variables until a new input has been made.
>Does anyone know how I could implement that?
>Which Hardware could I use and which interface should I use for data transfer (e.g. CAN-BUS)?
>
>Thanks for your help, Greetings
>
>_____________________________________
_____________________________________
Does I2C not work for you?
greetings Mike
Hi there,
>
>I want to connect the DSP with a LCD and a keypad.
>When switched on the user is asked about certain parameters, which he can feed into, using the keypad. The collected data has to be transmitted to the DSP and stored in the variables until a new input has been made.
>Does anyone know how I could implement that?
>Which Hardware could I use and which interface should I use for data transfer (e.g. CAN-BUS)?
>
>Thanks for your help, Greetings
>
>_____________________________________
_____________________________________
Reply by ●February 4, 20092009-02-04
some lcd & keypads use serial commuication
so which data transfer yo use really depends on the hardware you selected
--- On Mon, 2/2/09, u...@rocketmail.com wrote:
From: u...@rocketmail.com
Subject: [c28x] Connect F2812 to LCD+keypad
To: c...
Date: Monday, 2 February, 2009, 1:41 AM
Hi there,
I want to connect the DSP with a LCD and a keypad.
When switched on the user is asked about certain parameters, which he can feed into, using the keypad. The collected data has to be transmitted to the DSP and stored in the variables until a new input has been made.
Does anyone know how I could implement that?
Which Hardware could I use and which interface should I use for data transfer (e.g. CAN-BUS)?
Thanks for your help, Greetings
_____________________________________
so which data transfer yo use really depends on the hardware you selected
--- On Mon, 2/2/09, u...@rocketmail.com wrote:
From: u...@rocketmail.com
Subject: [c28x] Connect F2812 to LCD+keypad
To: c...
Date: Monday, 2 February, 2009, 1:41 AM
Hi there,
I want to connect the DSP with a LCD and a keypad.
When switched on the user is asked about certain parameters, which he can feed into, using the keypad. The collected data has to be transmitted to the DSP and stored in the variables until a new input has been made.
Does anyone know how I could implement that?
Which Hardware could I use and which interface should I use for data transfer (e.g. CAN-BUS)?
Thanks for your help, Greetings
_____________________________________
