I'm using an Atmel 89C51CC02CA. I'm trying to use the Api-functions,
implemented in the bootloader. I understood that i first have to write my
values to the api_command, api_value and api_dptr (dpl and dph), which is
placed in the controllers ram. Then i have to call the codeadress 0xFFF0h.
But doing so leads to a reset of the controller. i tried different
commands, the result is the same. So i guess the code-adress is wrong?
watchdog is disabled, so are the interrupts. oh, and the ENBOOT-bit is
Thank you for any ideas!