Hi All, I am facing issues in enumerating USB mouse /Keyboard on my target hardware. My hardware and OS details are as below: Hardware Davinci (DM6446) OS WinCE 6.0 Problem description: I have an internal hub IC on board. when i conenct mouse/KBD or mass storage on the downstream port of internal hub i dont see any issues and all devices work fine. Now i connect a self powered External hub to one of the down stram ports of the on board hub. when i try connecting a mouse/KBD to one of the downstream ports of the second hub i see that it fails to enumerate. i opbserve that the SET_ADDRESS command fails as the host doen not recieve any response from peripheral. I donot face any issues in mass storage when it is connected to second level hub. Also, i want to share another observation. If i coonect the external hub and than power on my board the mouse/KBD gets enumerated without issues.ie i am not facing issues when the external hub was connected prior to boot up. Please direct me if you have any clue or have faced similar issue ... Thanks in advance , Anil
USB Mouse enumeration issue
Started by ●May 28, 2009