Long shot: looking for legacy SBC

Hi,  Many years ago there was a SBC that emulated a PDP8-E, IIRC 
IMS61-something-or-other?

If there's one or two out there that still work, I'd be interested in 
getting hold of them. Nothing in EBAY, I'm not sure where else to look. TIA 

There are actually several PDP-8e around. Most are based on the 
Intersil IM6100 or Harris HD-6120  

There is a moderately active news group dedicated to the 
pdp 8 you might want to look at alt.sys.pdp8


Regards,


w..
--
Walter Banks
Byte Craft Limited
http://www.bytecraft.com



Noodnik wrote:
> 
> Hi,  Many years ago there was a SBC that emulated a PDP8-E, IIRC
> IMS61-something-or-other?
> 
> If there's one or two out there that still work, I'd be interested in
> getting hold of them. Nothing in EBAY, I'm not sure where else to look. TIA

On Dec 5, 5:02=A0am, Walter Banks <wal...@bytecraft.com> wrote:
> There are actually several PDP-8e around. Most are based on the
> Intersil IM6100 or Harris HD-6120 =A0
>
> There is a moderately active news group dedicated to the
> pdp 8 you might want to look at alt.sys.pdp8
>
> Regards,
>
> w..
> --
> Walter Banks
> Byte Craft Limitedhttp://www.bytecraft.com
>
> Noodnik wrote:
>
> > Hi, =A0Many years ago there was a SBC that emulated a PDP8-E, IIRC
> > IMS61-something-or-other?
>
> > If there's one or two out there that still work, I'd be interested in
> > getting hold of them. Nothing in EBAY, I'm not sure where else to look.=
 TIA

There is at least one FPGA version also:
    <http://www.aracnet.com/~healyzh/pdp8emu.html>
    <http://madscientistroom.org/fpga/pdp8.html>

A typical desk-top PC would probably be able to emulate a PDP-8 at 10X
the throughput of the real thing...

I'm guessing that your real challenge is reading the data that you
would be feeding to this PDP-8

RK

Noodnik wrote:
> Hi,  Many years ago there was a SBC that emulated a PDP8-E, IIRC
> IMS61-something-or-other?
>
> If there's one or two out there that still work, I'd be interested in
> getting hold of them. Nothing in EBAY, I'm not sure where else to look. TIA

I have a working PDP 8/L out in the garage.