EmbeddedRelated.com
Forums
The 2024 Embedded Online Conference

ARM7 selection question

Started by Johnny May 27, 2004
I am looking for the an ARM7 system with the following features:
* 256kB on-chip SRAM.
* Ethernet MAC (Could be external)
* USB Device interface (Could be external)
* External interface for several MB of flash memory.

My application: 
* No more than about 10 MIPS processing speed, plus any extra for
servicing Ethernet and USB.
* Cost sensitive.
* Planned to stay in production for 5 years.  
* Long-term availablity is an important consideration.

So far I am looking at the Atmel AT91R40008 with an external solution
for Ethernet and USB.  Should I be looking at ARM9, or maybe a
Motorola processor?

regards,
Johnny.





On Thu, 27 May 2004 20:39:48 +1000, Johnny
<john_wr@NOSPAM.hotmail.com.> wrote:

>I am looking for the an ARM7 system with the following features: >* 256kB on-chip SRAM. >* Ethernet MAC (Could be external) >* USB Device interface (Could be external) >* External interface for several MB of flash memory. >
Reading this, I think, a nice selector at www.arm.com would be nice :-) --- 42Bastian Do not email to bastian42@yahoo.com, it's a spam-only account :-) Use <same-name>@epost.de instead !
Johnny wrote:
> I am looking for the an ARM7 system with the following features: > * 256kB on-chip SRAM. > * Ethernet MAC (Could be external) > * USB Device interface (Could be external) > * External interface for several MB of flash memory. > > My application: > * No more than about 10 MIPS processing speed, plus any extra for > servicing Ethernet and USB. > * Cost sensitive. > * Planned to stay in production for 5 years. > * Long-term availablity is an important consideration. > > So far I am looking at the Atmel AT91R40008 with an external solution > for Ethernet and USB. Should I be looking at ARM9, or maybe a > Motorola processor? > > regards, > Johnny. >
My vote to AT91R40008. I'm using it in several projects. The total addressing capability for external bus is 64 Mbytes, including all external peripherals. For Ethernet I'm using SMSC LAN91C96 for 10 Mbit/s and LAN91C111 for 10/100 Mbits/s. Tauno Voipio tauno voipio @ iki fi
42Bastian Schick wrote:
> > On Thu, 27 May 2004 20:39:48 +1000, Johnny > <john_wr@NOSPAM.hotmail.com.> wrote: > > >I am looking for the an ARM7 system with the following features: > >* 256kB on-chip SRAM. > >* Ethernet MAC (Could be external) > >* USB Device interface (Could be external) > >* External interface for several MB of flash memory. > > > > Reading this, I think, a nice selector at www.arm.com would be nice
There is a selection guide (although not altogether up to date) at this page http://www.arm.com/markets/microcontrollers/ The direct link is http://www.arm.com/miscPDFs/3858.pdf -- Rick "rickman" Collins rick.collins@XYarius.com Ignore the reply address. To email me use the above address with the XY removed. Arius - A Signal Processing Solutions Company Specializing in DSP and FPGA design URL http://www.arius.com 4 King Ave 301-682-7772 Voice Frederick, MD 21701-3110 301-682-7666 FAX

The 2024 Embedded Online Conference