SH-3 DSP reference design for embedded Linux.

Dear all,

I'd like to build my own prototype board based on Renesas SH-3 DSP 
(SH7727) that could be ready to run embedded Linux on. I know how the 
memory structure (types of memories and address assignment) should be 
done as far as I write my own bios but I'd like it to be also ready for 
embedded Linux. I have found many software examples in this matter but 
could not find any hardware reference designs. It seems that none of 
embedded platform manufactures gives access to schematics with exception 
   - you can get ones when buying starter-kit.

Best regards
Wlad

On Thursday, in article <406BD878.8010402@wp.pl>
     whanski@wp.pl "Wlad" wrote:

>Dear all,
>
>I'd like to build my own prototype board based on Renesas SH-3 DSP 
>(SH7727) that could be ready to run embedded Linux on. I know how the 
>memory structure (types of memories and address assignment) should be 
>done as far as I write my own bios but I'd like it to be also ready for 
>embedded Linux. I have found many software examples in this matter but 
>could not find any hardware reference designs. It seems that none of 
>embedded platform manufactures gives access to schematics with exception 
>   - you can get ones when buying starter-kit.

Most starter kits are not expensive for SH3 and linux, even come with SHLinux
and tools for the board.

You have looked at www.shlinux.com for information then?

-- 
Paul Carpenter		| paul@pcserv.demon.co.uk
<http://www.pcserv.demon.co.uk/>        Main Site
<http://www.gnuh8.org.uk/>              GNU H8 & mailing list info.
<http://www.badweb.org.uk/>             For those web sites you hate.