Hi all... I have an application that runs on a PC104 in a RTOS enviroment ( On-time RTOS-32). Now i need to control a dot printer (EPSON LQ300+); to make it i need to write a low level driver to manage LPT port signals. I have no experience in it... ....please help me.... Thank's in advance Massimo
Dot printer in RTOS
Started by ●February 19, 2004
Reply by ●February 19, 20042004-02-19
Massimo Dazzan wrote:> Hi all... > > I have an application that runs on a PC104 in a RTOS enviroment ( On-time > RTOS-32). > Now i need to control a dot printer (EPSON LQ300+); to make it i need to > write a low level driver to manage LPT port signals. > I have no experience in it... > ....please help me....There is a printer manual explaining all the codes to be sent to the printer. If you don't have it, get it from the manufacturer. Then just implement them. It boils down to writing some data to some peripheral port. Rene -- Ing.Buero R.Tschaggelar - http://www.ibrtses.com & commercial newsgroups - http://www.talkto.net