If you are looking for a good bootlaoder for your new hardware... then I am able to help you out with porting u-boot to your platform.. Only requirements: - Available toolchain for the platform...either free gcc/binutils or commercial package has to be supplied. - Sponsoring of at least 1 target platform for the porting service (quantity depends on the complexity) For more details and references contact: richard-at-uclinux-net that's all...no charges (o; rick
u-boot bootloader porting....
Started by ●December 31, 2004
Reply by ●December 31, 20042004-12-31
Hi, Visit www.revogear.com and repost this message to them nicely. The userbase for the Kuro Box is clamoring for a decent u-boot port. In particular, they would like the ability to boot off a HDD-based kernel instead of the flash-based kernel. But the majority of users are not sufficiently embedded to be able to do it. And I don't have time ;) I'm sure Revolution will give you a Kuro if you promise them u-boot, and the MPC8241 is supported by standard GNU toolchain, precompiled versions of which are available for download from them.