I am working on an embedded WinCE 5.0 project at my universi=ADty. I
play full screen VCD MPEG on 1024x768. I try to use an AMD G=ADEODE GX1
which is equipped with an MPEG decoder assistant and arbitra=ADry
(CS5530A). I conducted experiments with WMP: it worked fine =ADin 100%
resize of the video), but the fps dropped down significantly=AD when I
rescale the video (ex.: 200%). The video playing at 100% was=AD fine,
a 720xX MPEG video. So I assume that the WMP, which is obvio=ADusly
through DirectShow, may uses the MPEG decoder, but not the s=ADcaling
capabilities of the hardware.
Are my assumptions right? The scaling capabilities not imple=ADmented in
Reply by ●February 3, 20052005-02-03
> I am working on an embedded WinCE 5.0 project at my universi=ADty. I
Using the exact same hardware, but using Linux, I did a range of
commercial products. The only way to get acceptable fullscreen
performance is to use an analog video path and switch into a native
lo-res video mode when playing the VCD.