Gerbv

søndag den 19. august 2018 kl. 12.09.33 UTC+2 skrev Dimiter:
> On 19.8.2018 г. 01:33, Chris wrote:
> > On 08/18/18 18:22, Dimiter_Popoff wrote:
> >
> >
> >>
> >> Somewhat remotely related but while on a mechanical wave perhaps
> >> someone would weigh in as to how to weld PT100 leads to teflon
> >> wire. Soldering is not an option, they work around 300C and if
> >> they lose feedback etc. they could get to 400. Well at 400 the
> >> joint will not be the only victim but still.
> >> Any experiences?
> >>
> >
> > Do search on "pulse arc welder". Used for very thin wire welding,
> > thermocouples etc...
> >
> >
> > Chris
> >
> 
> Thanks, I think I get it how it is done now. Not sure I'll buy
> such a welder though, I only need a few welded for now.

https://youtu.be/dRTplGUzw28?t=13m30s