Hello to all I just bought the Micro Web Server (MWS V2.00 Kit) from Achatz. This kit is based on the Micro Atmel AVR (AT90S8535). I'm not a guru with assemble programming, but very interested to learn it. Could somebody tell me a good book about the IC described above? Many thanks in advance for any help. Otto
Assembler with Atmel AVR
Started by ●December 21, 2004
Reply by ●December 21, 20042004-12-21
Otto wrote:> Hello to all > > I just bought the Micro Web Server (MWS V2.00 Kit) from > Achatz. This kit is based on the Micro Atmel AVR > (AT90S8535). > > I'm not a guru with assemble programming, but very > interested to learn it. > Could somebody tell me a good book about the IC described > above?Start downloading the Atmel datasheet for the device. At the end, there is a description of the ASM commands. And there is also a downloadable ASM development IDE including the ASM. Rene -- Ing.Buero R.Tschaggelar - http://www.ibrtses.com & commercial newsgroups - http://www.talkto.net
Reply by ●December 21, 20042004-12-21
It would be a very good idea to sign up to www.avrfreaks.com. I found this Kanda book very useful back in 2000. I'm sure it would still be relevant. http://www.kanda.com/index.php3?cs=1&bc=direct&bw=%2Fbrowse.php3%3Fcat%3DTraining%2520and%2520Books. You don't have to use assembler, it's easier to use C these days. Peter
Reply by ●December 21, 20042004-12-21
It would be a very good idea to sign up to www.avrfreaks.com. I found this Kanda book very useful back in 2000. I'm sure it would still be relevant. http://www.kanda.com/index.php3?cs=1&bc=direct&bw=%2Fbrowse.php3%3Fcat%3DTraining%2520and%2520Books. You don't have to use assembler, it's easier to use C these days. Peter
Reply by ●December 21, 20042004-12-21
Humm, I have to use www.avrfreaks.net to get to my favorite site. The .com ending doesn't work for me. If one link doesn't work try the other. AVRFreaks is a great site, they have a lot of info and tutorials there for you to go through. "peterk" <peterk.vt80@gmail.com> wrote in message news:1103636002.430350.275320@f14g2000cwb.googlegroups.com...> It would be a very good idea to sign up to www.avrfreaks.com. I found > this Kanda book very useful back in 2000. I'm sure it would still be > relevant. > http://www.kanda.com/index.php3?cs=1&bc=direct&bw=%2Fbrowse.php3%3Fcat%3DTraining%2520and%2520Books. > You don't have to use assembler, it's easier to use C these days. > Peter >