Would you recommend any particular embedded HW with the following specs and able to run Linux? ( o ) - 5 x RS232 ports (upto 115200 bits/sec) ( o ) - 1 x 10/100 MBits/sec ethernet ( o ) - 2 x 8 bits general purpose digital I/O lines (TTL) ( o ) - Able to booth from either Support ComaptFlash memory unit or USB memory stick ( o ) - Weight less than 100grams ( o ) - Size smaller than 10 cm x 10 cm ( o ) - ADC inputs (Optional) ( o ) - Low-cost (Desirable :) Thanks for your guidance Gregembe
Small, lightweight embedded HW to run Linux
Started by ●July 20, 2005
Reply by ●July 20, 20052005-07-20
On Wed, 20 Jul 2005 23:58:17 +1000, Greg Brown <gbrown@nohotmail.com> wrote:> Would you recommend any particular embedded HW with the following specs > and able to run Linux?[snip] I've come across http://www.cdatas.com few days ago. (I have no affiliation with them whatsoever) Vadim
Reply by ●July 20, 20052005-07-20
Thake a look to the FOX board: www.acmesystems.it "Greg Brown" <gbrown@nohotmail.com> ha scritto nel messaggio news:42de587f$0$8417$afc38c87@news.optusnet.com.au...> Would you recommend any particular embedded HW with the following specs > and able to run Linux? > > ( o ) - 5 x RS232 ports (upto 115200 bits/sec) > ( o ) - 1 x 10/100 MBits/sec ethernet > ( o ) - 2 x 8 bits general purpose digital I/O lines (TTL) > ( o ) - Able to booth from either Support ComaptFlash memory unit or > USB memory stick > > ( o ) - Weight less than 100grams > ( o ) - Size smaller than 10 cm x 10 cm > ( o ) - ADC inputs (Optional) > ( o ) - Low-cost (Desirable :) > > Thanks for your guidance > > Gregembe >