AT91RM9200_EK

Hi
I have a AT91RM9200 evaluation kit (AT91RM9200_EK).
I want to know how could I use any devices other than DataFlash card for
booting the board and downloading the Win CE image?
when I say "any devices other than DataFlash card" I mean onboard parallel
flash or the MMC,SDcard and so on.
thanks

On Sat, 31 Dec 2005 08:43:21 -0600, "layaghi" <layaghi@yahoo.com>
wrote:

>Hi
>I have a AT91RM9200 evaluation kit (AT91RM9200_EK).
>I want to know how could I use any devices other than DataFlash card for
>booting the board and downloading the Win CE image?
>when I say "any devices other than DataFlash card" I mean onboard parallel
>flash or the MMC,SDcard and so on.
>thanks
>

You can select onboard parallel flash by changing a jumper, IIRC.

-- 
Dan Henry

To boot from the Data Flash Card on AT91RM9200 EK Board, Set jumper J15
between 1-2 positions. (Between the INT pin and the middle pin), insert
the Data Flash by keep its back side at top to backside jacket of the
board.