Looking for qual lan fanless x86 compliant solution

Hi group,

I'm looking for an embedded quad lan, prefereable fanless x86 compliant
solution. If possible, mounted in a 1U chassis would be nice. Also, I
would prefer USB, VGA, COM-connectors NOT to be accessible from the
outside.

Basically, looking for a network appliance box. Mini-itx or any other
SBC - anything goes.

Any ideas and pointers are greatly appreciated. Thank you for help.

br, Christian

<depsirhc@gmail.com> wrote in message
news:1139530080.822342.170010@g43g2000cwa.googlegroups.com
> Hi group,
>
> I'm looking for an embedded quad lan, prefereable fanless x86
> compliant solution. If possible, mounted in a 1U chassis would be
> nice. Also, I would prefer USB, VGA, COM-connectors NOT to be
> accessible from the outside.
>
> Basically, looking for a network appliance box. Mini-itx or any other
> SBC - anything goes.
>
> Any ideas and pointers are greatly appreciated. Thank you for help.
>
Christian,

Take a look at Gespac's Via products at
<http://www.gndusa.com/index.asp?formdb_cmd=viewfiche&numfiche=1737&numr
ub=1030>.

-- 
James T. White

Thank you, James. I see a couple of 3xLAN-boards in there. I guess a
fourth LAN could be included as an extension board, which could do.

However, I would prefer a solution already boxed, like the iWill G304
Security Appliance (http://www.iwill.net/product_2.asp?p_id=19&sp=Y) ,
but that one is only built on demand, 20 pcs minimum.

br, Christian

<depsirhc@gmail.com> wrote in message
news:1139538146.922285.21540@f14g2000cwb.googlegroups.com
> Thank you, James. I see a couple of 3xLAN-boards in there. I guess a
> fourth LAN could be included as an extension board, which could do.
>
> However, I would prefer a solution already boxed, like the iWill G304
> Security Appliance (http://www.iwill.net/product_2.asp?p_id=19&sp=Y) ,
> but that one is only built on demand, 20 pcs minimum.
>

Christian,

For some reason, I focused on "fanless" and missed your quad Lan
requirement.  Sorry.

The only SBC with 4 LAN ports that I'm aware of is the EMAC PCM-9578
http://www.emacinc.com/sbc_pc_compatible/pcm_9578.htm.  It is a Socket
370 board that supports Intel Celeron or Pentium III processors so it
will likely require a fan.

-- 
James T. White